Medisana HGV Instruction Manual page 24

51222_HGV_Serbien_5spr.qxd:Blutdruckmessgerät
GB
3 Getting Started
3.2
Setting time
and date
3.3
Adjusting the
voice function
18
1. The date and time can be set with the device switched off. Press the START
button and the MEM button
the display (flashing). To change the month, press the MEM button
repeatedly until the required value is displayed. The value auto-repeats if
the MEM button is held down. Pressing the START button
displays the values for month, day, hour and minute (flashing). Press the
MEM button to change the values.
2. After the fifth press of the START button
stop flashing. The time setting is now complete.
3. The date and time must be reset if the batteries are replaced.
The voice function can be adjusted with the device switched off, i.e. with just
the date and time displayed. Press and hold down the MEM button
the selected language appears on the display (e.g. L1).
L0 = Language function switched off
L1 = Serbian
L2 = German
L3 = English
L4 = French
L5 = Dutch
The device speaks the language setting, and changes the display and the an-
nouncement to the next language if the MEM button
selected language can be changed by releasing the MEM button
as the language that you require is displayed or spoken. The selected volume,
which is indicated by flashing bars, can be modified by pressing the MEM
button again and holding it down until the required volume is indicated –
the higher the bar, the louder the volume. The bar stops flashing and the
display switches back to the time display.
09.12.2010 7:59 Uhr
simultaneously. The month appears on
the numbers in the display
is held down. The
Seite 18
again
until
as soon