Table of Contents
Advertisement
ADJUSTMENTS & SETTINGS (MAIN MENU)
COLOR ADJ Colour adjustment display
•
The colour of the source image and memorized image can be adjusted.
•
Open this menu also by pressing the COLOR ADJUST button on the remote control unit.
SELECT
Selects colour print or black and white print.
COLOR
Colour print
B&W
Black and white print (The monitor shows in colours.)
BRT (Bright)
Adjusts brightness of the printing image. (The whole image will be
adjusted.)
CONT (Contrast)
Adjusts contrast of the printing image. (The image will be adjusted
based on the black level.)
R-SUB
Adjusts red-subcontrast of the printing image. Red is added with
] and blue is added with [.
G-SUB
Adjusts green-subcontrast of the printing image. Green is added
with ] and pink is added with [.
B-SUB
Adjusts blue-subcontrast of the printing image. Blue is added with
] and yellow is added with [.
When pressing ], the values of BRT, CONT, R-SUB G-SUB and
CENTER
B-SUB will be reset to 0.
CANCEL
Cancels the change of COLOR ADJ and resets to the stored setting.
•
When selecting B&W, R-SUB, G-SUB and B-SUB change to Y-SUB, M-SUB, C-
SUB. When selecting THERMAL : OFF (colour print), each value of Y-SUB, M-
SUB and C-SUB is available to adjust the colour of the printed image. When selecting
THERMAL : ON (thermal print), only Y-SUB value is available and function as the
density of gray colour of the printed image.
•
When SELECT is changed from COLOR to B&W, the set values of R-SUB, G-SUB,
and B-SUB function as the density of gray colour.
LAYOUT Layout setting display
MODE
Selects the print size. Normally select the ink sheet size which is
installed in this unit. (See page 12 for the print paper.)
AUTO
L size ink sheet.
When S size ink sheet is installed, S size is automatically set.
S
S size ink sheet or S size printing with L size ink sheet, and S size
printing with thermal paper.
L
L size printing with thermal paper.
•
When using thermal paper (selecting THERMAL : ON in SYSTEM SETUP menu),
AUTO/S is changed to L/S.
MULTI
Selects ON or OFF for 2, 4, or 16 images on a sheet.
OFF
Multi-image print is not available. 1 image mode.
OFF(PRNSEL.) 4 memory pages display. 1 image mode.
ON
Multi-image print is available.
•
When selecting OFF or OFF(PRNSEL.), MODE: SAME/DIFF/PHOTO1 and
IMAGES : 2/2S/4/16 are not displayed.
•
When setting AUTO CLEAR to MEM or AFT. PRN in OFF(PRNSEL.), only
selecting page is cleared.
MODE
Selects print mode.
SAME
Prints images of the same scenes on a sheet.
DIFF (Different) Prints images of different scenes on a sheet.
PHOTO1
Prints images in PHOTO mode.
•
This menu is displayed only when MULTI : ON is selected.
32
COLOR ADJ
SELECT COLOR/B&W
BRT
: 0
CONT : 0
R-SUB : 0
C
R
G-SUB : 0
M
G
B-SUB : 0
Y
B
CENTER
CANCEL
LAYOUT
MODE
AUTO/S
MULTI
OFF/OFF(PRNSEL.)/ON
MODE
SAME/DIFF/PHOTO1
IMAGES
2/2S/4/16
SIZE
: W/M/N/USER
COPY
: OFF/W/M/N
TOP
: 0 (0 -48)
BOTTOM : 0 (0 -48)
LEFT
: 0 (0 -63)
RIGHT
: 0 (0 -63)
Advertisement
Table of Contents
