Time And Date; Camera Sequence Setup - Philips VidQuad LTC 2372 Installation Instructions Manual

5.3

Time and Date

This menu allows you to set the date and time format, the
current time/date, and the displayed position on the monitor.
• Select TIME/DATE and press the
menu is displayed:
(1) TIME FORMAT
(2) DATE FORMAT
(3) TIME/DATE SET
(4) DISPLAY : BOTTOM
(5) EXIT
5.3.1 Time Format
• Select TIME FORMAT and press the
following menu is displayed:
TIME FORMAT
12 HOURS (AM/PM)
• Press the 1 key, and toggle to select the required format.
Options are as follows:
12 HOURS (AM/PM)
24 HOURS (0000-2359).
• Press the key.
5.3.2 Date Format
• Select DATE FORMAT and press the
following menu is displayed:
DATE FORMAT
MM/DD/YEAR
• Press the 1 key, and toggle to select the required format.
Options are as follows:
MM/DD/YEAR
DD/MM/YEAR
YEAR/MM/DD
• Press the key.
5.3.3
• Select TIME/DATE SET and press the
key. The following
• Press the
• Press the
key. The
• Press the
5.3.4
• Select the DISPLAY function.
• Press the
• Select EXIT and press the
key. The
5.4
This menu allows you to adjust the dwell times of the 4 camera
video and the Quad screens.
• Select SEQ SETUP and press the
• Press the
11
Time/Date Set
following menu is displayed:
TIME/DATE SET
12:00:00 AM
HH:MM:SS
TO EXIT PRESS ENTER KEY
< and > keys to move the cursor to the
required position.
and keys to establish the necessary digit
(calenders until the year of 2097 are in this menu).
key.
Display Mode Set
(1) TIME FORMAT
(2) DATE FORMAT
(3) TIME/DATE SET
(4) DISPLAY : BOTTOM
(5) EXIT
key to toggle through BOTTOM, TOP, and
OFF. The Date/Time will be displayed on the monitor in
the selected position.

Camera Sequence Setup

menu is displayed:
DWELL TIME
(1) CAMERA 1 : 9 SEC
(2) CAMERA 2 : 9 SEC
(3) CAMERA 3 : SKIP
(4) CAMERA 4 : 9 SEC
(5) QUAD : 9 SEC
(6) EXIT
and keys to move the cursor to the
required channel.
key. The
12/31/1999
MM/DD/YEAR
key to exit the menu.
key. The following