Table of Contents
Advertisement
4-27
Exit
Positioning the cursor to "Exit" shows the Exit menu.
The options on the menu are described below.
Exit Saving Changes
Select this item to terminate SETUP after saving the newly selected information in CMOS (non-volatile memory). The
selection of "Exit Saving Changes" causes the confirmation screen to appear.
If you select "Yes," SETUP is terminated with the newly selected information saved in CMOS (non-volatile memory).
Then the server automatically reboots the system.
Exit Discarding Changes
Select this item to terminate SETUP without saving the newly selected information in CMOS (non-volatile memory).
Selecting "Yes" allows SETUP to be terminated without storage of the modified information. If the setting value is
modified, the confirmation screen will appear.
Selecting "No" allows SETUP to be terminated without storage of the modified information. If you select "Yes" in the
next screen, SETUP is terminated with the modified information saved in CMOS. Then the server automatically reboots
the system.
Load Setup Defaults
Select this item to return all the values of SETUP to the default values. Selecting "Load Setup Defaults" causes the
confirmation screen to appear.
Select "Yes" to return the values to the default values. Select "No" to return to the Exit menu screen.
Save Custom Defaults/Load Custom Defaults
Running the Save Custom Defaults menu saves the current SETUP parameters as the user-defined SETUP defaults. The
Load Custom Defaults menu is used to restore the user-defined SETUP defaults.
Discard Changes
Select this item to return the values modified currently to the previous values before saving the values to CMOS.
Selecting "Discard Changes" causes the confirmation screen to appear.
Select "Yes" to discard the newly selected information and return to the previous values.
Advertisement
Table of Contents
