Pci Board - NEC 140He User Manual

9-20

PCI Board

The server contains six slots for PCI board, and three slots for PCI-Express board.
Some PCI boards support the hot-plug function by which they may be installed or removed with the power of the server
being on. Your server supports the hot-plug function if the Windows Server 2003 or Windows 2000 is used as operating
system. The PCI boards supporting the hot-plug function only include the N8104-86 100BASE-TX Adapter, N8104-111
100BASE-TX Adapter and the N8103-103 1000BASE-T Adapter.
IMPORTANT:
touch the metal frame of the server to discharge static electricity from your body before
handling the PCI board. Do not touch the PCI board terminals or on-board parts by a bare
hand or place the PCI board directly on the desk. For static notes, see the section
"Anti-static Measures".
NOTES:
The tab on the PCI board slot indicates hot-plug or non-hot-plug by its colour. Hot-plug
slots have a green tab (PCI slot #5 through #8), and non-hot-plug slots have a blue tab
(PCI slot #1 through #4).
The PCI-Express boards are x1, x4, x8, and x16. The server can contain x1, x4, and x8
PCI-Express board.
The PCI board is extremely sensitive to static electricity. Make sure to
Non-hot-plug PCI board slots
(colour: blue)
Hot-plug PCI board slots
(colour: green)
PCI #1, #2 (32-bit/33MHz, 5V PCI)
PCI #3 (PCI-Express (x4))
PCI #4, #5 (PCI-Express(x8))
PCI #6, #7, #8, #9
(64-bit/100MHz, 3.3V PCI-X)