Hitachi PB Series User Manual page 96

6–6 6.2 On-screen Message Descriptions
No. Message
10 Ink Drop Charge Too High
Internal Communication
11
Error C
Internal Communication
12
Error M
Meaning of message
The value of the signal
that detects the particle
charge is too high.
Failure of data processing
within the engine section.
Failure of data processing
within the engine section.
Remedy
Clean the gutter,
deflection electrode,
adjacent parts.
Adjust the excitation
setting to make sure
that the ink particles
are properly shaped.
Adjust the ink pres-
sure.
Check that the ink
beam is correctly
retracted.
Turn OFF the power
and then turn back
ON.
Turn OFF the power
and then turn back
ON.
Section 6