D-Link DWC-1000 User Manual page 135

Section 5 - Advanced Network Configuration
Field
Connection type
Host name (optional)
iP Address
iP subnet Mask
Default Gateway
Dns server(s)
Address Mode
iP Address/subnet Mask
User name
Password
service
Authentication type
reconnect Mode
Address Mode
server Address
User name
Password
MPPe encryption
split tunnel
reconnect Mode
Address Mode
server Address
User name
Password
secret
split tunnel
reconnect Mode
D-Link DWC-1000 User Manual
Select the type of your Internet connection (Static, Dynamic, PPPoE, PPTP, L2TP, Japanese PPPoE, Russian
PPPoE, Russian PPTP, or Russian L2TP).
Specify the host-name option to send to the DHCP server. The host-name string only contains the client's
host name prefix, to which the server will append the DDNS domain name or domain-name options, if any, to
derive the fully qualified domain name of the client
Enter the static address that your ISP assigned to you. This address will identify the controller to your ISP.
Enter the subnet mask.
Enter the default gateway IP address.
Enter the primary and secondary DNS server IP address(es).
PPPoe/Japanese PPPoe/russian PPPoe
Select either Dynamic IP or Static IP.
If you selected Static, enter the IP address and subnet mask supplied to you by your ISP.
Enter your PPPoE user name.
Enter your PPPoE password.
Use this field if you need to distinguish two servers using the same Username and Password combination.
With PPP, as you can't specify servers using IP address, you can specify the particular server to connect to using
this field.
Select the type of Authentication to use (Auto-Negotiate, PAP, CHAP, MS-CHAP, or MS-CHAPv2).
Select one of the following options:
• Always On: The connection is always on.
• On Demand: The connection is automatically ended if it is idle for a specified number of minutes. Enter
the number of minutes in the Maximum Idle Time field. This feature is useful if your ISP charges you
based on the amount of time that you are connected.
PPtP/russian PPtP
Select either Dynamic IP or Static IP.
Enter the IP address or the domain name of the PPTP server.
Enter your PPTP user name.
Enter your PPTP password.
Toggle ON if your ISP supports MPPE Encryption.
nabling split tunnel will prevent you from adding a Gateway IP address and instead you need to add specific
routes to route LAN traffic.
Select one of the following options:
• Always On: The connection is always on.
• On Demand: The connection is automatically ended if it is idle for a specified number of minutes. Enter
the number of minutes in the Maximum Idle Time field. This feature is useful if your ISP charges you
based on the amount of time that you are connected.
l2tP/russian l2tP
Select either Dynamic IP or Static IP.
Enter the IP address or the domain name of the L2TP server.
Enter your PPTP user name.
Enter your PPTP password.
Enter the secret phrase to log into the server.
Enabling split tunnel will prevent you from adding a Gateway IP address and instead you need to add specific
routes to route LAN traffic.
Select one of the following options:
• Always On: The connection is always on.
• On Demand: The connection is automatically ended if it is idle for a specified number of minutes. Enter
the number of minutes in the Maximum Idle Time field. This feature is useful if your ISP charges you
based on the amount of time that you are connected.
Description
Dynamic
static
135