Hitachi Compute Blade 500 Series System Overview Manual page 65

Items
Fabric service
Hardware options
Operation management
Power supply
External dimensions (W x D x H: mm)
Mass
Table 2-28 Brocade 16 Gb/sec Fibre Channel Switch Module specifications
Items
FCSW component
Fibre channel ports
Supported line speeds
Total bandwidth
Fabric latency
Fibre channel Supported
specification standards
Service classes
Maximum frame size
Data traffic
Media type
In-band through the management module
Standard Fabric service
Optional Ports On Demand (POD)
(at additional Fabric Watch
charge)
ISL Trunking
SFP+ (for adding one external port)
USB memory (for updating firmware; backing up and
restoring configuration)
These functions are also available through FTP server
without this option.
SNMPv1, syslog, telnet, http, ftp
12 V
161 x 252 x 32.3
1.5 kg (including SFP+)
Brocade 6546
Minimum:
12 ports, internal and/or external, assigned as desired.
Maximum:
16 internal ports (Serdes interfaces to the server blades)
8 external ports
4.25 Gb/sec line speed, full duplex,
8.5 Gb/sec line speed, full duplex,
14.025 Gb/sec line speed, full duplex
673 Gb/sec
24 ports x 14.025 Gb/sec (line speed) x 2 (full duplex)
700 ns (16 Gb/sec with cut-through routing)
Fibre channel specification
Class 2, class 3, class F
2112 byte payload
Unicast, multicast, broadcast
16 Gb SFP+, LC connector, short-wave laser
Maximum distance:
• Multi-mode 62.5 μm cable (OM1)
70 m at 4 Gb/sec; 21 m at 8 Gb/sec; 15 m at 16 Gb/sec
Specification
Hitachi Compute Blade 500 Series System Overview Guide
Specifications
Specifications
2-19