Hitachi Compute Blade 500 Series System Overview Manual page 39

1/10 Gb/sec LAN Switch Module
Table 1-19 1/10 Gb/sec LAN Switch Module Switches, Indicators and
Location
1
2
3
4
5
6
7
8
9
10
Figure 1-36 1/10 Gb/sec LAN Switch Module
Name
LAN ports 1 to 4
10GBASE-R slots
Memory Card slot (MC) -
Access LED (ACC)
Reset switch (RST)
LINK LED for XFP
TX/RX LED for XFP
Power LED (PWR)
Status1 LED (ST1)
Identify LED (LOCID)
System Overview
Hitachi Compute Blade 500 Series System Overview Guide
Connectors
State
Green-On Link established.
Green-Blink Link communication.
Amber-On Link failed.
- Slots for 10GBASE-LR or 10GBASE-SR
transceivers. Each slot has both link and
activity LEDs to the side.
Slot for an SD memory card.
Green-On The SD memory card is accessed.
- Press and hold for five seconds to reset
the LAN switch module.
Green-On Link established.
Amber-On Link failed.
Green-On Link communication.
Green-On Powered-on, normal operation.
Green-On Normal operation.
Green-Blink Power-on diagnostics or firmware
activation.
Red-Blink Fault. Max temperature limit exceeded
or other warning.
Red-On Alarm.
Blue-On The switch module is identified.
Description
1-31