Safety Precautions - Philips LTC 8100 Series Installation Instructions Manual

Allegiant microprocessor-based switcher/control systems
Table of Contents

Advertisement

SAFETY PRECAUTIONS

CAUTION: TO REDUCE THE RISK OF
ELECTRICAL SHOCK, DO NOT OPEN
COVERS. NO USER SERVICEABLE PARTS
INSIDE. REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
This label may appear on the bottom of the unit due to space
limitations.
The lightning flash with an arrowhead symbol, within
an equilateral triangle, is intended to alert the user to the
presence of uninsulated "dangerous voltage" within the
product's enclosure that may be of sufficient magnitude
to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is
intended to alert the user to presence of important
operating and maintenance (servicing) instructions in
the literature accompanying the appliance.
WARNING
TO PREVENT FIRE OR SHOCK HAZARD, DO
NOT EXPOSE UNITS NOT SPECIFICALLY
DESIGNED FOR OUTDOOR USE TO RAIN OR
MOISTURE.
Attention: Installation should be performed by
qualified service personnel only in accordance with the
National Electrical Code or applicable local codes.
Power Disconnect. Units with or without ON-OFF
switches have power supplied to the unit whenever the
power cord is inserted into the power source; however,
the unit is operational only when the ON-OFF switch
is in the ON position. The power cord is the main
power disconnect for all units.
Battery Replacement Caution
Use only the Recommended Power Supplies. Power
supplies must comply with the requirements of the
latest version of IEC 65/VDE 0860. Substitutions may
damage the unit or cause a fire or shock hazard.
SECURITE
DANGER: POUR ÉVITER TOUT RISQUE
D'ÉLECTROCUTION, NE PAS OUVRIR LE BOÎTIER.
IL N'Y A PAS DE PIÈCES REMPLAÇABLES À
L'INTÉRIEUR. POUR TOUTE RÉVISION,
S'ADRESSER À UN TECHNICIEN SPÉCIALISÉ.
En raison de limitation de place, cette étiquette peut être placée
sur le dessous de l'appareil.
L'éclair fléché dans un triangle équilatéral, avertit
l'utilisateur de la présence d'une "tension dangereuse"
non isolée à l'intérieur de l'appareil et d'une valeur
suffisante pour constituer un risque d'électrocution.
Le point d'exclamation contenu dans un triangle
équilatéral, avertit l'utilisateur de la présence, dans la
documentation qui accompagne l'appareil, de consignes
d'utilisation et de maintenance importantes.
ATTENTION
POUR ÉVITER LE RISQUE D'ÉLECTROCUTION OU
D'INCENDIE, NE PAS EXPOSER À LA PLUIE OU À
L'HUMIDITÉ UN APPAREIL NON CONÇU POUR
UNE UTILISATION EXTÉRIEURE.
Attention: L'installation doit être effectuée uniquement
par du personnel de service qualifié conformément à la
réglementation du Code Electrique National ou à la
réglementation locale.
Disjonction de l'alimentation. Les appareils avec ou
sans commutateurs ON-OFF sont alimentés à chaque
fois que le cordon d'alimentation est branché à la
source d'alimentation; toutefois, les appareils disposant
de commutateurs ON-OFF ne fonctionnnent que
lorsque le commutateur ON-OFF est sur la position
ON. Le cordon d'alimentation est la disjonction
d'alimentation principale pour tous les appareils.
Changement de piles - Attention!
Danger d'explosion si le changement de pile n'est pas
effectué correctement. N'utilisez que des piles du même
type ou d'un type équivalent recommandé par le
fabricant. Veuillez respecter les consignes du fabricant
lorsque vous jetez les piles usagées.
4

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Ltc 8200 seriesLtc 8300 series

Table of Contents