Network Settings; Network Setting - Motorola WPS870G User Manual

WPS870G
The printers attached to the WPS870G are displayed along with basic information.
Click Refresh to update the status of the printers.

Network Settings

Network Settings allows you to change how you want to log on to the WPS870G.

Network Setting

Click Network Settings to access the window. The Network Settings window is displayed:
You have two options at this point, either DHCP or Set IP Address. If you are using a router
with a DHCP server that has assigned an IP address to the WPS870G, then select DHCP.
Motorola recommends this approach because there is less management involved.
Otherwise, select Set IP Address and type the necessary information.
Item Description
Type the IP address you want to assign to the WPS870G. If you
IP Address
require assistance in determining a static IP address, refer to
You Begin, a
A subnet mask specifies a particular IP network or a host within a
Subnet Mask
sub-network. If you have a router, type the Subnet mask for the
segment to which the Wireless Print Server is attached, most likely
255.255.255.0.
Choice.
User Guide
Before
PAGE 40