User Guide
Test Print and Restore Button
The Wireless Print Server is fitted with a Restore button. This button has two functions:
Prints a test page containing all current settings (if your printer supports this)
Restores the factory default settings
To generate a diagnostic test page:
Note: PostScript printers are unable to print this page. If you have a PostScript printer attached, the test page
will not be printed. Use a non-PostScript printer instead. Also, printers that only use GDI printer language
cannot print a diagnostic page.
Ensure that both the WPS870G and the attached printer are powered.
1
Press and release the Restore button. A test page prints containing the current settings.
2
To restore the factory default settings:
Press and hold the Restore button for 5 seconds.
1
After 5 seconds the WPS870G returns to its factory default settings:
2
–
Returns the login password to its factory default value of "motorola"
–
Sets the IP address assignment to dynamic (use DHCP server)
–
Obtains an IP address
PAGE 5
Parallel
Power
USB
Reset
LAN
Restore
Button
WPS870G