D-Link DWL-8200AP User Manual
  1. Manuals
  2. Brands
  3. D-Link Manuals
  4. Wireless Access Point
  5. D DWL-8200AP DWL-8200AP
  6. User manual
D-Link DWL-8200AP User Manual

D-Link DWL-8200AP User Manual

Airpremier 802.11a/g managed dualband
Hide thumbs Also See for DWL-8200AP:
Table of Contents

Advertisement

Quick Links

Download this manual See also: User Manual, Installation Manual

Advertisement

Table of Contents
loading

Related Manuals for D-Link DWL-8200AP

Summary of Contents for D-Link DWL-8200AP

  • Page 2: Table Of Contents

    Home > Advanced Settings > Multi-SSID ............ 36 Home > Advanced Settings > Rogue AP ............. 39 Home > Advanced Settings > DHCP Server > ..........40 Dynamic Pool Settings ................40 Static Pool Settings ................42 D-Link DWL-800AP User Manual...
  • Page 3 System > System Settings ................62 Help ......................63 AP Manager II ..................... 64 Networking Basics .................... 65 Troubleshooting ....................81 Technical Specifications ................... 87 Contacting Technical Support ................90 Warranty ......................91 Registration ......................95 D-Link DWL-800AP User Manual...

  • Page 4: Product Overview

    Mounting Plate Note: Using a power supply with a different voltage than the one included with the DWL-8200AP will cause damage and void the warranty for this product. If any of the above items are missing, please contact your reseller.

  • Page 5: Introduction

    802.11 network or device. The DWL-8200AP is capable of operating in one of 3 different modes to meet your wireless networking needs. The DWL-8200AP can operate as an access point, or in WDS (Wireless Distribution System) with AP, or in WDS mode.
  • Page 6 802.1x: Authentication which is a first line of defense against intrusion. In the authentication process, the Authentication Server verifies the identity of the client attempting to connect to the network. Unfamiliar clients would be denied access. D-Link DWL-800AP User Manual...

  • Page 7: Features & Benefits

    WPA (Wi-Fi Protected Access) providing a much higher level of security for your data and communications than has previously been available. SNMP for Management - The DWL-8200AP is not just fast but it also supports ...

  • Page 8: Wireless Basics

    D-Link wireless products will allow you to access the data you want, when and where you want it. You will be able to enjoy the freedom that wireless networking brings.

  • Page 9: Standards-Based Technology

    The DWL-8200AP offers the most advanced network security features available today, including WPA and WPA2. In addition to its compatibility with 802.11g and 802.11a devices, the DWL-8200AP is compatible with 802.11b devices. This means that if you have an existing 802.11b network, or a network with a mixture of 802.11g, 802.11a and 802.11b, the devices in that network will be compatible with...

  • Page 10: Installation Considerations

    Keep the number of walls and ceilings between the DWL-8200AP and other network devices to a minimum - each wall or ceiling can reduce your DWL-8200AP’s range from 3-90 feet (1-30 meters.) Position your devices so that the number of walls or ceilings is minimized.

  • Page 11: Three Operational Modes

    Three Operational Modes Operation Mode Function Access Point (AP) Create a wireless LAN (WLAN) Wirelessly connect multiple networks while still WDS with AP functioning as an access point. Wirelessly connect multiple networks. D-Link DWL-800AP User Manual...

  • Page 12: Installation

    Connect the DWL-8200AP to the PoE base unit. (See the printed Quick Installation Guide included with the DWL-8200AP.) If you are connecting a desktop computer to your network, install the D-Link DWL-AG530 wireless PCI adapter into an available PCI slot on your desktop computer.

  • Page 13: Connecting Poe (Power Over Ethernet)

    Step 1 Connect one end of an Ethernet cable (included with your package) to the LAN port on the DWL-8200AP and the other end of the Ethernet cable to the port labeled P+DATA OUT on the PoE base unit. Step 2...

  • Page 14: Hardware Overview

    Hardware Overview Antennas Power Cord socket LAN 2 Reset LAN 1 (PoE) D-Link DWL-800AP User Manual...

  • Page 15: Configuration

    Just change your Browser’s address line from “http://...” to “https://...” and log into the AP again. After the connection is established, you will see the user identification window as shown. Note: If you have changed the default IP address assigned to the DWL-8200AP, make sure to enter the correct IP address.
  • Page 16 After successfully logging into the DWL-8200AP the following screen appears: When making changes on most of the configuration screens in this section, use the Apply button at the bottom of each screen to save your configuration changes. Click to apply configuration changes.

  • Page 17: Home > Basic Settings > Wireless

    Displays the default channel for the wireless network. All devices on the network must share the same channel. The channel of an 802.11a network may not be set manually in certain regions (e.g. Europe and USA) in order to comply with DFS (Dynamic Frequency Selection). D-Link DWL-800AP User Manual...
  • Page 18 Select WPA-Auto-Enterprise to allow the client to either use WPA-Enterprise or WPA2-Enterprise. Select WPA-Auto-Enterprise to allow the client to either use WPA-Personal or WPA2-Personal. Radio: Select On or Off. Selecting Off will turn off all wireless functions. D-Link DWL-800AP User Manual...

  • Page 19: Wep Encryption

    * Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-800AP User Manual...

  • Page 20: Wpa-Enterprise, Wpa2-Enterprise & Wpa-Auto Enterprise

    RADIUS Secret: Enter the RADIUS secret. Accounting Mode: Select if you want to use a different server for accounting. Accounting Server: Enter the IP address of the Accounting server. Accounting Port: Enter the Accounting port (1813 is default). D-Link DWL-800AP User Manual...

  • Page 21: Wpa-Personal, Wpa2-Personal & Wpa-Auto Personal

    Group Key Update Select the interval during which the group key will be valid. The default Interval: value of 1800 is recommended. PassPhrase: When you select WPA-Personal, WPA2-Personal, or WPA-Auto-Personal, please enter a PassPhrase in the corresponding field. D-Link DWL-800AP User Manual...

  • Page 22: Home > Basic Settings > Wireless > Wds With Ap Mode

    Home > Basic Settings > Wireless > WDS with AP mode In WDS with AP mode, the DWL-8200AP wirelessly connects multiple networks, while still functioning as a wireless AP. Wireless Band: Select either IEEE 802.11a or IEEE 802.11g Mode: WDS with AP is selected from the pull-down menu.
  • Page 23 Select WPA2-Personal to secure your network using a password and dynamic key changes. No RADIUS server required and encryption of data is upgraded with the Advanced Encryption Standard (AES). Select WPA-Auto-Personal to allow the client to either use WPA-Personal or WPA2-Personal. D-Link DWL-800AP User Manual...

  • Page 24: Wep Encryption

    Fourth keys: in the valid key field. * Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-800AP User Manual...

  • Page 25: Wpa-Personal, Wpa2-Personal, Wpa-Auto Personal

    Group Key Update Select the interval during which the group key will be valid. The Interval: default value of 1800 is recommended. PassPhrase: When you select WPA-Personal, WPA2-Personal, or WPA-Auto-Personal please enter a PassPhrase in the corresponding field. D-Link DWL-800AP User Manual...

  • Page 26: Home > Basic Settings > Wireless > Wds Mode

    Home > Basic Settings > Wireless > WDS Mode In WDS, the DWL-8200AP wirelessly connects multiple networks, without functioning as a wireless AP. Wireless Band: Select either IEEE 802.11a or IEEE 802.11g Mode: WDS is selected from the pull-down menu.
  • Page 27 Select WPA2-Personal to secure your network using a password and dynamic key changes. No RADIUS server required and encryption of data is upgraded with the Advanced Encryption Standard (AES). Select WPA-Auto-Personal to allow the client to either use WPA-Personal or WPA2-Personal. D-Link DWL-800AP User Manual...

  • Page 28: Wep Encryption

    Fourth keys: in the valid key field. * Hexadecimal digits consist of the numbers 0-9 and the letters A-F. ASCII (American Standard Code for Information Interchange) is a code for representing English letters as numbers 0-127. D-Link DWL-800AP User Manual...

  • Page 29: Wpa-Personal, Wpa2-Personal, Wpa-Auto Personal

    W h e n y o u s e l e c t W PA - Pe r s o n a l , W PA 2 - Pe r s o n a l , o r WPA-Auto-Personal, please enter a PassPhrase in the corresponding field. D-Link DWL-800AP User Manual...
  • Page 30 Open System Shared Key Open System/Shared Key WPA-Enterprise WPA-Personal WPA2-Enterprise WPA2-Personal WPA-Auto-Enterprise WPA-Auto-Personal WDS with AP Open System Shared Key Open System/Shared Key WPA-Personal WPA2-Personal WPA-Auto-Personal Open System Shared Key Open System/Shared Key WPA-Personal WPA2-Personal WPA-Auto-Personal D-Link DWL-800AP User Manual...

  • Page 31: Home > Basic Settings > Lan

    LAN is short for Local Area Network. This is considered your internal network. These are the IP settings of the LAN interface for the DWL-8200AP. These settings may be referred to as private settings. You may change the LAN IP address if needed. The LAN IP address is private to your internal network and cannot be seen on the Internet.

  • Page 32: Home > Advanced Settings > Performance

    Displays the current frequency for the wireless network. The frequency reflects the choice of the wireless band. Indicates the channel setting for the DWL-8200AP. The channel can be Channel: changed to fit the channel setting for an existing wireless network or to customize the wireless network.
  • Page 33 *Maximum wireless signal rate derived from IEEE Standard 802.11a and 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead lower actual data throughput rate. D-Link DWL-800AP User Manual...
  • Page 34 2.4GHz) will automatically switch to the antenna with the greatest RSSI value. When disabled, each radio will use its main antenna - when facing the AP, 5GHz will use the right antenna to transmit and receive packets while the 2.4GHz radio will use the left. D-Link DWL-800AP User Manual...

  • Page 35: Home > Advanced Settings > Grouping

    When Enabled, you allow several DWL-8200APs to balance wireless network traffic and wireless clients among DWL-8200APs in the network. Assign each access point a different non-overlapping channel (e.g., 1, 6, 11). User Limit (0-64): Set the User Limit in this field (0-64). D-Link DWL-800AP User Manual...

  • Page 36: Home > Advanced Settings > Multi-Ssid

    (WLAN). The SSID’s factory default setting is dlink. The SSID can be easily changed to connect to an existing wireless network or to establish a new wireless network. SSID Broadcast: Select Disable to prevent the SSID name to be broadcast. D-Link DWL-800AP User Manual...
  • Page 37 Group Key Update Select the interval during which the group key will be valid. The Interval: default value of 1800 is recommended. PassPhrase: When you select WPA-Personal, please enter a PassPhrase in the corresponding field. D-Link DWL-800AP User Manual...
  • Page 38 Note: If WPA or WPA2 is being used, it will occupy the key space 2 and 3, which will leave key 1 and 4 for other SSIDs to use for WEP. When you configure one Multi-SSID, you must click Save to Table and then click Apply to save your settings. D-Link DWL-800AP User Manual...

  • Page 39: Home > Advanced Settings > Rogue Ap

    If the AP is in the same network, or if you know the AP, just click on “Add” to save it to the AP list. AP List: This window shows all of the APs that are allowed access on the network. D-Link DWL-800AP User Manual...

  • Page 40: Home > Advanced Settings > Dhcp Server

    IP addresses automatically without the need to manually assign new IP addresses. Select Enable to allow the DWL-8200AP to function as a DHCP server. IP Assigned From: Input the first IP address available for assignment in your network.
  • Page 41 Server) translates domain names such as www.dlink.com into IP addresses. Domain Name: Enter the domain name of the DWL-8200AP, if applicable. (An example of a domain name is: www.dlink.com.) Lease Time: The Lease Time is the period of time before the DHCP server will assign new IP addresses.

  • Page 42: Static Pool Settings

    IP addresses automatically without the need to manually assign IP addresses. Select Enable to allow the DWL-8200AP to function as a DHCP server. Use the Static Pool Settings to assign the same IP address to a Assigned IP: device at every restart.
  • Page 43 Enter the IP address of the Domain Name Server, if applicable. The DNS translates domain names such as www.dlink.com into IP addresses. Domain Name: Enter the domain name of the DWL-8200AP, if applicable. Status: This option turns the Static Pool settings ON or OFF. D-Link DWL-800AP User Manual...

  • Page 44: Current Ip List

    This screen displays information about the current DHCP dynamic and static IP address pools. This information is available when you enable the DHCP function of the DWL-8200AP and assign dynamic and static IP address pools. Current DHCP These are IP address pools to which the DHCP server function has Dynamic Pools: assigned dynamic IP addresses.
  • Page 45 Binding MAC address: The MAC address of a device on the network that is within the DHCP static IP address pool. Assigned IP address: The current corresponding DHCP-assigned static IP address of the device. D-Link DWL-800AP User Manual...

  • Page 46: Home > Advanced Settings >Filters

    Enter the MAC addresses that you wish to include in your filters list, and click Save. MAC Address List: When you enter a MAC address, it appears in this list. Highlight a MAC address and click Delete to remove it from the list. D-Link DWL-800AP User Manual...

  • Page 47: Wireless Mac Acl

    Enabling this feature allows Ethernet devices to communicate with Ethernet to WLAN wireless clients. If this is disabled, all data from the Ethernet to Access: associated wireless devices is blocked. Wireless devices can still send data to the Ethernet devices. D-Link DWL-800AP User Manual...

  • Page 48: Home > Status > Device Information

    Home > Status > Device Information Device Information: This window displays the configuration settings of the DWL-8200AP, including the firmware version and device MAC address. It also displays WLAN information for both the 802.11a and 802.11g wireless networks. D-Link DWL-800AP User Manual...

  • Page 49: Home > Status > Client Information

    Home > Status > Client Information Client Information: This window displays the wireless client information for clients currently connected to the DWL-8200AP. The following infor mation is available for each client communicating with the DWL-8200AP. SSID: Displays the SSID the client is connected to.

  • Page 50: Home > Status > Wds Information

    Displays the MAC address of the client. Band: Displays the wireless band the client is connected on. Authentication: Displays the type of authentication being used. Signal: Displays the strength of the clients signal. Channel: Displays the wireless channel being used. D-Link DWL-800AP User Manual...

  • Page 51: Home > Status > Stats > Wlan 802.11A Statistics

    Home > Status > Stats > WLAN 802.11a Statistics WLAN 802.11a This page displays statistics for data throughput, transmitted and Traffic Statistics: received frames, and WEP frame errors for the 802.11a wireless network. D-Link DWL-800AP User Manual...

  • Page 52: Home > Status > Stats > Wlan 802.11G Statistics

    Home > Status > Stats > WLAN 802.11g Statistics WLAN 802.11g This page displays statistics for data throughput, transmitted and Traffic Statistics: received frames, and WEP frame errors for the 802.11g wireless network. D-Link DWL-800AP User Manual...

  • Page 53: Home > Status > Log > View Log

    Home > Status > Log > View Log View Log: The log displays system and network messages including a time stamp and message type. D-Link DWL-800AP User Manual...

  • Page 54: Home > Status > Log > Log Settings

    Log Server / IP Enter the IP address of the server you would like to send the Address: DWL-8200AP log to. Log Type: Check the box for the type of activity you want to log. There are three types: System, Wireless and Notice.

  • Page 55: Tool Menu

    Tool Menu The DWL-8200AP Tool menu gives access to the Administrator settings, the Firmware and SSL Certification upload menu, the device configuration file settings, and SNTP settings. The DWL-8200AP Tool menu gives access to the Administrator settings, the Firmware and SSL Certification upload menu, the device configuration file settings, and SNTP settings.

  • Page 56: Tool > Administrator Settings

    User Name: Enter a user name. The default is admin. Old Password: When changing your password, enter the old password here. New Password: When changing your password, enter the new password here. Confirm New Confirm your new password here. Password: D-Link DWL-800AP User Manual...
  • Page 57 Console Protocol: Select the type of protocol you would like to use, Telnet or SSH. SNMP Settings Status: Status is Enabled by default. Un-check the box to disable the SNMP functions. Public Community Enter the public SNMP community string. String: Private Community Enter the private SNMP community string. String: D-Link DWL-800AP User Manual...

  • Page 58: Tool > Firmware And Ssl Certification Upload

    Tool > Firmware and SSL Certification Upload Upload Firmware After downloading the most recent version of firmware for the DWL-8200AP from http://support.dlink.com to your local computer, use the Browse button to locate the firmware file on your computer. Click Upload to update the firmware version.

  • Page 59: Tool > Configuration File Upload And Download

    Upload File: Click Browse to locate a previously saved configuration file on your local computer. After selecting the file, click Upload to apply the configuration settings to the DWL-8200AP. Download Click Download to save the current DWL-8200AP configuration Configuration File: to your local computer. D-Link DWL-800AP User Manual...

  • Page 60: Tool > Configuration File > Upload

    Upload screen, a dialog box appears. Select the file you wish to download and click Open. Click Restart for the settings to take effect. When prompted, click OK, and the device will restart. Please wait for a few seconds. D-Link DWL-800AP User Manual...

  • Page 61: Tool > Sntp

    SNTP/NTP Displays the current SNTP/NTP settings. Information: SNTP/NTP Server Enter the SNTP/NTP server IP address. IP Address: SNTP/NTP Select your correct Time Zone. Time Zone: Daylight Saving Check the box to Enable Daylight Saving Time. Time: D-Link DWL-800AP User Manual...

  • Page 62: System > System Settings

    System > System Settings Click Restart to restart the DWL-8200AP. Click Restore to restore the DWL-8200AP back to factory default settings. D-Link DWL-800AP User Manual...

  • Page 63: Help

    Help Help: Scroll down the Help page for topics and explanations. D-Link DWL-800AP User Manual...

  • Page 64: Ap Manager Ii

    AP Manager II allows you to configure AP settings, update the firmware, and organize and sort your APs into manageable groups. Please see the AP Manager II User Manual included on the CD for system requirements, installation considerations, and information on the software functionality. D-Link DWL-800AP User Manual...

  • Page 65: Networking Basics

    Note: Please refer to websites such as http://www.homenethelp.com and http://www.microsoft.com/windows2000 for information about networking computers using Windows 2000. ® Go to Start > Control Panel>Network Connections Select Set up a home or small office network When this screen appears, click Next. D-Link DWL-800AP User Manual...
  • Page 66 Please follow all the instructions in this window: Click Next. In the following window, select the best description of your computer. If your computer connects to the internet through a gateway/router, select the second option as shown. Click Next. D-Link DWL-800AP User Manual...
  • Page 67 Enter a Computer description and a Computer name (optional). Click Next. Enter a Workgroup name. All computers on your network should have the same Workgroup name. Click Next. D-Link DWL-800AP User Manual...
  • Page 68 Please wait while the Network Setup Wizard applies the changes. When the changes are complete, click Next. Please wait while the Network Setup Wizard configures the computer. This may take a few minutes. D-Link DWL-800AP User Manual...
  • Page 69 In the window below, select the option that fits your needs. In this example, Create a Network Setup Disk has been selected. You will run this disk on each of the computers on your network. Click Next. Insert a disk into the Floppy Disk Drive, in this case drive A. Click Next. D-Link DWL-800AP User Manual...
  • Page 70 Please read the information under Here’s how in the screen below. After you complete the Network Setup Wizard you will use the Network Setup Disk to run the Network Setup Wizard once on each of the computers on your network. To continue click Next. D-Link DWL-800AP User Manual...
  • Page 71 You have completed configuring this computer. Next, you will need to run the Network Setup Disk on all the other computers on your network. After running the Network Setup Disk on all your computers, your new wireless network will be ready to use. D-Link DWL-800AP User Manual...
  • Page 72 Select the Computer Name Tab in the System Properties window.  You may enter a Computer Description if you wish; this field is optional.   To rename the computer and join a domain, Click Change. D-Link DWL-800AP User Manual...
  • Page 73 (see Getting Started in this manual for a definition of IP Address Range.) To check on the IP Address of the adapter, please do the following:  Right-click on the Local Area Connection icon in the task bar.  Click on Status. D-Link DWL-800AP User Manual...
  • Page 74 This window will appear:  Click the Support tab.  Click Close. D-Link DWL-800AP User Manual...
  • Page 75 If you are not using a DHCP capable router, or you need to assign a static IP address, please follow these instructions: Go to Start.   Double-click on Control Panel.  Double-click on Network Connections. D-Link DWL-800AP User Manual...
  • Page 76 For example, if one computer has an IP address of 192.168.0.2, the other computers should have IP addresses that are sequential, like 192.168.0.3 and 192.168.0.4. The subnet mask must be the same for all the computers on the network.) D-Link DWL-800AP User Manual...
  • Page 77 The DNS server information will be supplied by your ISP (Internet Service Provider.)  Click OK. Assigning a Static IP Address in Macintosh ®  Go to the Apple Menu and select System Preferences. Click on Network.  D-Link DWL-800AP User Manual...
  • Page 78  Select Built-in Ethernet in the Show pull-down menu.  Select Manually in the Configure pull-down menu.  Input the Static IP Address, the Subnet Mask and the Router IP Address in the appropriate fields.  Click Apply Now. D-Link DWL-800AP User Manual...
  • Page 79  Go to the Apple Menu and select System Preferences. Click on Network.  Select Built-in Ethernet in the Show pull-down menu.  Select Using DHCP in the Configure pull-down menu.  D-Link DWL-800AP User Manual...
  • Page 80 Go to Start > Run > type cmd. A window similar to this one will appear. Type ping xxx.xxx. xxx.xxx, where xxx is the IP address of the wireless router or access point. A good wireless connection will show four replies from the wireless router or access point, as shown. D-Link DWL-800AP User Manual...

  • Page 81: Troubleshooting

    1. The computer used to configure the DWL-8200AP cannot access the Configuration menu.  Check that the Ethernet LED on the DWL-8200AP is ON. If the LED is not ON, check that the cable for the Ethernet connection is securely inserted.
  • Page 82  Check that the IP address assigned to the wireless adapter is within the same IP address range as the access point and gateway. Since the DWL-8200AP has an IP address of 192.168.0.50, wireless adapters must have an IP address in the same range, e.g., 192.168.0.x.
  • Page 83 You may be using different network adapters than those illustrated here, but this procedure will remain the same, regardless of the type of network adapters you are using.  Go to Start > My Computer > Properties.  Select the Hardware Tab.  Click Device Manager. D-Link DWL-800AP User Manual...
  • Page 84 Double-click on Network Adapters.  Right-click on D-Link AirPlus DWL-G650 Wireless Cardbus Adapter. (In this  example we use the DWL-G650; you may be using other network adapters, but the procedure will remain the same.)  Select Properties to check that the drivers are installed properly.
  • Page 85 6. Why can’t I get a wireless connection? If you have enabled encryption on the DWL-8200AP, you must also enable encryption on all wireless clients in order to establish a wireless connection.  Make sure that the SSID on the router and the wireless client are exactly the same.
  • Page 86 7. I forgot my encryption key.  Reset the DWL-8200AP to its factory default settings and restore the other devices on your network to their default settings. You may do this by pressing the Reset button on the back of the unit. You will lose the current configuration settings.

  • Page 87: Technical Specifications

    • 223ft (68m) @ 12Mbps • 253ft (77m) @ 9Mbps • 302ft (92m) @ 6Mbps Outdoors: • 328ft (100m) @ 54Mbps • 968ft (295m) @ 11Mbps • 1378ft (420m) @ 6Mbps Operating Voltage • 48VDC +/- 10% for PoE D-Link DWL-800AP User Manual...
  • Page 88 • 6mW (7dBm) • 1mW (0dBm) Receiver Sensitivity For 802.11a: • 6Mbps: -87dBm • 9Mbps: -86dBm • 11Mbps: -88dBm • 12Mbps: -85dBm • 18Mbps: -83dBm • 24Mbps: -80dBm • 36Mbps: -76dBm • 48Mbps: -71dBm • 54Mbps: -71dBm D-Link DWL-800AP User Manual...
  • Page 89 * Maximum wireless signal rate derived from IEEE Standard 802.11a and 802.11g specifications. Actual data throughput will vary. Network conditions and environmental factors, including volume of network traffic, building materials and construction, and network overhead, lower actual data throughput rate. ** Environmental conditions may adversely affect wireless signal range. D-Link DWL-800AP User Manual...

  • Page 90: Contacting Technical Support

    Contacting Technical Support Technical Support You can find software updates and user documentation on the D-Link website. D-Link provides free technical support for customers within the United States and within Canada for the duration of the warranty period on this product.

  • Page 91: Warranty

    The customer’s sole and exclusive remedy and the entire liability of D-Link and its suppliers under this Limited Warranty will be, at D-Link’s option, to repair or replace the defective Hardware during the Warranty Period at no charge to the original owner or to refund the actual purchase price paid.
  • Page 92 UPS Ground or any common carrier selected by D-Link. Return shipping charges shall be prepaid by D-Link if you use an address in the United States, otherwise we will ship the product to you freight collect.
  • Page 93 Limitation of Liability: TO THE MAXIMUM EXTENT PERMITTED BY LAW, D-LINK IS NOT LIABLE UNDER ANY CONTRACT, NEGLIGENCE, STRICT LIABILITY OR OTHER LEGAL OR EQUITABLE THEORY FOR ANY LOSS OF USE OF THE PRODUCT, INCONVENIENCE OR DAMAGES OF ANY CHARACTER, WHETHER DIRECT,...
  • Page 94 This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. D-Link DWL-800AP User Manual...

  • Page 95: Registration

    Registration Product registration is entirely voluntary and failure to complete or return this form will not diminish your warranty rights. Version 2.0 July 13, 2007 D-Link DWL-800AP User Manual...

Table of Contents