Table of Contents
Advertisement
25 Click
26 Replace the Windows 98 CD with the Motorola product CD in
your CD drive.
27 Click
Correcting the Installed USB Driver Files
If you see messages about an Unknown device or Unknown
USB modem:
28 Click the Windows Start button, then choose Settings |
Control Panel.
29 Open System, then click the Device Manager tab.
30 Double-click Universal Serial Bus controllers.
31 Click Motorola USB modem (or USB Composite Device),
the click
remove the device.
32 Insert the Windows 98 Second Edition CD into your CD drive.
33 Browse to the Win98SE folder on the CD.
34 Open the file base5.cab with WinZip.
Note: WinZip is an archive utility. It is readily available on the
Web.
35 In base5.cab, select the file usbser.sys, and extract it to
C:\WINDOWS\SYSTEM32\DRIVERS
36 Replace the Windows 98 CD with the Motorola product CD in
your CD drive.
37 If the installation program does not start automatically, click
the Windows Start button, then choose Run. Enter D:\
168
Data and Fax Calls
to close the second New Hardware Wizard.
to continue installing the TrueSync software.
. Click
to confirm that you want to
Advertisement
Table of Contents
