Kenwood NEXEDGE NX-200 Instruction Manual page 8

n
oTificaTion of
Water Resistance and Maintenance
Ths transcever conforms to the followng standards:
IP67: The IP standard is the protection level specified by the
international standard IEC 60529. The first numeral indicates the
"dust-resstant" level and the second numeral ndcates the "water-
resstant" level
PRECAUTIONS
• The applcable standards lsted above do not assure that the
transcever can be used n water. The transcever may be
damaged n a stuaton n whch the maxmum depth s over
1 meter or the maxmum submerson tme exceeds 30 mnutes.
• Observe the followng precautons to mantan the transcever's
water-resstant performance:
a) Do not drop or apply strong physcal shocks to the transcever.
b) When you dsassemble the transcever or open the cover
of the opton board, IP67 wll no longer be mantaned. After
dsassemblng the transcever or openng the cover of the
opton board, f you want to contnue mantanng IP67, contact
your dealer or Authorzed Servce Center.
c) Do not soak the transcever n water that contans a solvent or
surfactant, such as detergent or alcohol.
• If t s soaked n muddy water or salt water (ncludng sea water),
it may become corroded. Immediately flush with fresh water and
then wpe dry wth a soft cloth.
• If water s splashed onto the mcrophone, the battery, or the
antenna termnal, clean and dry them wth a soft cloth before
reconnectng to the transcever.
• When water gets nto the mcrophone openng or the speaker
grll, the voce level may become low or dstorted. Lghtly shake
the transceiver to remove the water from the speaker and/or
mcrophone before operatng the transcever.
• Use of any option on the transceiver not specified by Kenwood,
may reduce or vod the water resstant and dust resstant
performance.
• When usng an opton wth the transcever, ensure that t
corresponds wth the IP67 standard.
W -r
aTer esisTanT
M
oDel
v