Kenwood NEXEDGE NX-200 Instruction Manual page 18

⑤ PTT (Push-To-Talk) switch
Press and hold this switch, then speak into the microphone
to call a station.
⑥ Side 1 key
Press to activate its programmable function {page 7}. The
default is Squelch Off Momentary.
⑦ Side 2 key
Press to activate its programmable function {page 7}. The
default is Backlight.
⑧ Keypad (keypad models only)
Press these keys to send DTMF tones. These keys can
also be programmed with secondary functions {page 7} if a
programmable function key is programmed as "Function".
⑨
key
Press to activate its programmable function {page 7}. The
default is Menu.
⑩
key
Press to activate its programmable function {page 7}. The
default is Zone Up.
⑪
key
Press to activate its programmable function {page 7}.
⑫
key
Press to activate its programmable function {page 7}.
⑬
key
Press to activate its programmable function {page 7}. The
default is Zone Down.
⑭
key
Press to activate its programmable function {page 7}.
⑮ Universal connector
Connect a speaker/ microphone or headset here {page 3}.
Otherwise, keep the supplied cap in place.