SL1100
Be sure the wall material can hold the weight of the base.
1.
Hold the base in its final location and mark the screw location based on the measurements shown
in
Figure 2-164 Base Mounting Dimensions on page
2.
Insert the appropriate anchors for the wall material.
3.
Insert the mounting screws into the anchors, leaving about 1/4 inch of space between the screw
head and the wall.
4.
Connect the Ethernet cable and route the cord as shown in
Dimensions on page
5.
Place the base over the screw heads and slide it down into place.
6.4.3 Handset and Charger
Figure 2-165 Handset Front View on page 2-117
Figure 2-166 Charger Top View on page 2-118
2-116
Figure 2-164 Base Mounting Dimensions
2-116.
provides a top view of the charger.
2-116.
Figure 2-164 Base Mounting
provides a front view of the handset and
ISSUE 5.0
Installation