SL1100
7.
Cut and remove the Plastic Knockout for VoIP connector, then replace the Main-Cover and fasten
two screws.
Main-Cover
Hooks
Figure 2-85 Removing the Plastic Knockout and Replacing the Main-Cover
8.
Connect the VOIPDB-C1 to an Switching hub using an LAN Cable.
The LAN Cable must pass two times (two rounds) through the Ferrite Core as below. (Ferrite
Core is attached with VOIPDB-C1)
VOIPDB-C1 board (CN1)
9.
Refer to the SL1100 Programming Manual for detailed programming instructions.
The VoIP feature requires system configuration.
For the details of setting and operation, refer to the SL1100 Features & Specifications Manual
(separate issue).
2-62
< Bottom View >
Figure 2-86 Connecting a LAN Cable
Plastic
Knockout
LAN Cable
Ferrite Core
Pass 2 times
to HUB
ISSUE 5.0
Two screws
30 - 50 mm
(1.181" - 1.967")
Installation