Serial Port (Back Panel); Front Panel Audio Port (Microphone); Front Panel Audio Port (Headphones Or Speakers) - Toshiba dynadock PA3541 User Manual

Serial Port (Back Panel)

To connect a serial device, attach the serial cable (not provided) to
the serial port on the dynadock and your serial device. Then install
the software driver according to the instructions that come with the
device. When prompted to select the port, choose COMx, where x is
the COM port number assigned by your operating system.
To see the COM port number assigned by your operating system:
In Windows Vista
1
Manager.
In Windows
Properties. Then click Hardware > Device Manager.
Under the Ports (COM & LPT) group, you should be able to
2
find Prolific USB-to-Serial Comm Port. The com port
number will appear next to the string.
(Sample Image) Locating the Serial Comm Port

Front Panel Audio Port (Microphone)

To connect a microphone, plug the 3.5 mm mono microphone jack
into the microphone input port.
NOTE
Your operating system may prompt you to continue.

Front Panel Audio Port (Headphones or Speakers)

After installing the provided audio software, a USB 3D 106 Sound
Configuration utility is installed in your computer. It can be
accessed by double-clicking the USB 3D 106 Sound
Configuration icon on the system tray.(The icon may be hidden if
the Windows
(Sample Image) USB 3D 106 Sound Configuration
®
, right-click Computer and select Device
®
XP, right-click My Computer and select
®
operating system recognizes it as inactive)
dynadock™ User's Manual
28