Programming The Remote Control To Operate The Tv - LG LST-5100P Owner's Manual

Programming the Remote Control to Operate the TV

The HDTV Receiver remote control is a multi-brand or universal remote con-
trol that can be programmed to operate most remote-controllable TVs from
other manufacturers.
ote
The remote control may not be able to control all models of other brands.
Test your remote control.
1 1
To find out whether your remote control can operate a TV without pro-
gramming, turn on the TV and press the TV on the remote control while
pointing at the TV. Use the TV POWER and TV PR +/– buttons to see if
the TV responds properly. If not, the remote control requires program-
ming.
Turn on the TV to be programmed.
2 2
Find the manufacturer code for your TV. (Refer to pages 34-35)
3 3
While holding down TV POWER button, press the number buttons
4 4
to select the manufacturer code for your TV.
Test the remote control functions to see if the device responds
5 5
properly. If not, repeat from step 3-4.
You can control your TV using the buttons below.
By pressing You can
POWER Turn the TV on or off.
TV/AV Switch the TV's input source between the TV and other
input sources.
PR +/– Scans up or down through memorized programmes.
VOL +/– Adjust the volume of the TV.
MUTE Temporarily turns TV sound OFF, press again to restore.
33