Setup Menu Options
ote
PIN is needed to access the SETUP menu if [Lock System] option is set
to [On].
Signal Strength
Shows the strength bar for incoming signal to help you adjust the antenna to
the correct position from your location.
Press MENU to display the on-screen menu.
1 1
Select the SETUP menu using 3 3 / 4 4 then press
2 2
Select the Signal Strength using 3 3 / 4 4 .
3 3
The signal strength bar will be displayed.
Press MENU to return to the previous screen or press EXIT on the
4 4
remote control to return to TV viewing.
ip
You can also view signal strength bar by pressing SIGNAL on the remote
control.
(SELECT) or 2 2 .
19