Panasonic KX-TDA100 Programming Manual page 308

2.7 [1] Configuration
Value Range
0.0.0.0–223.255.255.255
Maintenance Console Location
2.7.36 [1-1] Slot—IP-Extension Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
2.8.21 [2-12] IP Extension Settings (KX-TDA100/KX-TDA200/KX-TDA600 only) (not available for
MPR Software File Version 3.1000 or later)—Gateway Address
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Keep Alive Time Out
Specifies the length of time that the PBX will continue to consider an IP-PT to be active even if it
receives no transmissions from that IP-PT. The PBX constantly confirms the status of IP-PTs. If no
communications are received from an IP-PT for the duration specified here, the PBX considers the
IP-PT to be unreachable, and sets the port status to Fault.
During operation, set between 10 s and 60 s. Settings over 60 s, and Disable, are used for debugging
purposes, and IP-PTs cannot be guaranteed to function normally in these circumstances. Do not use
debugging settings unless instructed to do so.
Value Range
Disable, 10–120 s
Maintenance Console Location
2.7.36 [1-1] Slot—IP-Extension Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
Feature Guide References
1.31.1 IP Proprietary Telephone (IP-PT)
Echo Canceller Ability
Specifies the echo canceller ability time.
Value Range
OFF, 48 ms, 128 ms
Maintenance Console Location
2.7.36 [1-1] Slot—IP-Extension Card Property (KX-TDA100/KX-TDA200/KX-TDA600 only)
Programming Manual References
None
308 PC Programming Manual