Sony STR-DN1060 Parts And Controls
  1. Manuals
  2. Brands
  3. Sony Manuals
  4. Receiver
  5. STR-DN1060
  6. Parts and controls

Sony STR-DN1060 Parts And Controls

Hide thumbs Also See for STR-DN1060:
Table of Contents

Advertisement

Quick Links

See also: Service Manual , Reference Manual
MULTI CHANNEL AV RECEIVER

Parts and Controls

Receiver (STR-DN1060)
Front panel (STR-DN1060) (upper section) [1]
Front panel (STR-DN1060) (lower section) [2]
On/standby indicator (STR-DN1060) [3]
Indicators on the display panel [4]
Rear panel (STR-DN1060) [5]
Receiver (STR-DN860)
Front panel (STR-DN860) (upper section) [6]
Front panel (STR-DN860) (lower section) [7]
On/standby indicator (STR-DN860) [8]
Indicators on the display panel [9]
Rear panel (STR-DN860) [10]
Remote control
Remote control (upper section) [11]
Remote control (lower section) [12]
Preparation
1. Installing speakers
Installing 7.1-channel speaker system using surround back speakers [13]
Installing 7.1-channel speaker system using front high speakers [14]
Installing 5.1-channel speaker system [15]
STR-DN1060/STR-DN860

Advertisement

Table of Contents
loading

Related Manuals for Sony STR-DN1060

Summary of Contents for Sony STR-DN1060

  • Page 1: Parts And Controls

    STR-DN1060/STR-DN860 MULTI CHANNEL AV RECEIVER Parts and Controls Receiver (STR-DN1060) Front panel (STR-DN1060) (upper section) [1] Front panel (STR-DN1060) (lower section) [2] On/standby indicator (STR-DN1060) [3] Indicators on the display panel [4] Rear panel (STR-DN1060) [5] Receiver (STR-DN860) Front panel (STR-DN860) (upper section) [6]...

  • Page 2: Table Of Contents

    Installing speakers in other rooms (Zone 2/Zone 3) (for STR-DN1060 only) [16] 2. Connecting speakers Connecting speakers [17] Connecting the speakers in Zone 2 and/or Zone 3 (for STR-DN1060 only) [18] Bi-amplifier connections [19] 3. Connecting a TV Connecting a TV (for STR-DN1060) [20]...
  • Page 3 Connecting the receiver to the network using the wireless LAN antenna (for wireless LAN connections only) [39] 6. Turning on the receiver/preparing the remote control Inserting batteries into the remote control [40] Turning on the receiver [41] 7. Setting up the receiver using Easy Setup Setting up the receiver using Easy Setup [42] Tips for automatic calibration (Auto Calibration) 1.
  • Page 4 Notes on iPhone/iPad/iPod [58] Playing content from a USB device Enjoying content stored on a USB device [59] USB specifications and Compatible USB devices [60] Notes on USB devices [61] Listening to the radio Listening to FM radio [62] Presetting FM radio stations (Preset Memory) [63] Naming preset stations (Name Input) [64] Tuning to a station directly (Direct Tuning) [65] Receiving RDS broadcasts (for European and Asia-Pacific models only) [66]...

  • Page 5: Compatible Iphone/Ipad/Ipod

    Setting up a wired LAN connection (for wired LAN connections only) Connecting the receiver to the network using a LAN cable (for wired LAN connections only) [75] Setting up a wired LAN connection [76] Setting up a wireless LAN connection (for wireless LAN connections only) Connecting the receiver to the network using the wireless LAN antenna (for wireless LAN connections only) [77]...

  • Page 6: Using Bluetooth Features

    Registering TV SideView device to the receiver [87] Checking the registered TV SideView device (Registered Remote Devices) [88] Deleting TV SideView device from device list [89] Using Google Cast™ to enjoy audio content from a smartphone or tablet device Using Google Cast™ to enjoy audio content from a smartphone or tablet device [90] Setting whether to control this receiver from a device on the home network Setting whether to control this receiver from a controller device on the home network...

  • Page 7: Enjoying Video And

    (for STR-DN1060 only) 1. Connecting another amplifier in Zone 2 (for STR-DN1060 only) [109] 2. Setting the volume control for Zone 2 (Zone2 Line Out) (for STR-DN1060 only) [110] 3. Enjoying sound using another amplifier in Zone 2 (for STR-DN1060 only) [111]...

  • Page 8: Using Other Features

    About Controlling MHL devices [124] Enjoying video and sound with your desired way of use Switching the monitors that output the HDMI video signals (for STR-DN1060 only) [125] Switching between digital and analog audio (Input Mode) [126] Using other video/audio input jacks (Input Assign) [127]...

  • Page 9: Setting Up The Receiver Using Easy

    Selecting the Auto Calibration type (Calibration Type) [142] Setting how to assign the surround speaker terminals (Speaker Pattern/Surround SP Assign) (for STR-DN1060 only) [143] Selecting the speaker pattern and setting the assignment for the speaker terminals (Speaker Pattern/Sur Back SP Assign) [144]...
  • Page 10 Setting the HDMI audio signal output of connected devices (Audio Out) [175] Setting the level of the subwoofer (Subwoofer Level) [176] Selecting the method to use the HDMI OUT B jack (HDMI Out B Mode) (for STR-DN1060 only) [177] Setting the priority for the main zone (Priority) (for STR-DN1060 only) [178]...

  • Page 11: Turning On The

    Setting BLUETOOTH audio codecs (Bluetooth Codec - AAC/Bluetooth Codec - LDAC) [197] Setting the BLUETOOTH sound quality (Wireless Playback Quality) [198] Zone Settings (for STR-DN1060 only) Turning the power for Zone 2/Zone 3/HDMI zone on/off (Power) (for STR-DN1060 only) [199]...

  • Page 12: Troubleshooting

    [200] Adjusting the volume for Zone 2/Zone 3 (Volume) (for STR-DN1060 only) [201] Setting the volume control for Zone 2 (Zone2 Line Out) (for STR-DN1060 only) [202] System Settings Selecting the language (Language) (for USA, Canadian, European and Australian models...
  • Page 13 PROTECTOR [219] An over-current from the USB port was detected. [220] List of messages after Auto Calibration measurements [221] General The receiver is turned off automatically. [222] Cannot find an available input when connecting several digital devices. [223] Image No image appears on the TV. [224] No 3D image appears on the TV.

  • Page 14: Usb Devices

    The FM reception is poor. [241] The FM stereo reception is poor. [242] You cannot tune to radio stations. [243] RDS does not work (for European and Asia-Pacific models only). [244] The RDS information that you want does not appear (for European and Asia-Pacific models only).

  • Page 15: Music Services

    A server does not appear in the server list. ([Cannot find the server.] appears on the TV screen.) [264] Playback does not start, or the player does not automatically proceed to the next track or file. [265] The sound skips during playback. [266] [No playable file in this category.] appears.

  • Page 16: Other Information

    Reverting to the factory default settings [288] Resetting sound fields to the default settings [289] Customer support websites [290] Other Information Trademarks Trademarks [291] [1] Parts and Controls Receiver (STR-DN1060) Front panel (STR-DN1060) (upper section) (on/standby) 2. On/standby indicator 3. SPEAKERS...
  • Page 17 13. PURE DIRECT The indicator above the button lights up when the Pure Direct function is activated. [2] Parts and Controls Receiver (STR-DN1060) Front panel (STR-DN1060) (lower section) 1. PHONES jack Connect headphones here. 2. AUTO CAL MIC jack (USB) port 4.

  • Page 18: Indicators On The Display Panel

    [3] Parts and Controls Receiver (STR-DN1060) On/standby indicator (STR-DN1060) Green: The receiver is turned on. Amber: The receiver is in standby mode, and: [Control for HDMI], [Remote Start], [Bluetooth Standby] (*) or [Quick Start/Network Standby] (**) is set to [On].
  • Page 19 DTS-HD: DTS-HD 6. Speaker system indicator 7. Tuning indicator Lights up when the receiver tunes to a stereo broadcast. 8. HDMI OUT A + B (for STR-DN1060 only) 9. SLEEP Lights up when the sleep timer is activated. 10. EQ Lights up when the equalizer is activated.
  • Page 20 Lights up when a BLUETOOTH device is connected. Flashes while connecting. 20. Wired LAN indicator Lights up when a LAN cable is connected. [5] Parts and Controls Receiver (STR-DN1060) Rear panel (STR-DN1060) 1. COAXIAL IN jack 2. HDMI IN/OUT (*) jacks 3. Wireless LAN antenna 4. IR REMOTE IN/OUT jacks You can control the receiver from a distance by connecting an IR repeater (not supplied) to the IR REMOTE IN jack.
  • Page 21 9. AUDIO IN jacks 10. VIDEO IN/OUT (*) jacks 11. COMPONENT VIDEO IN/OUT (*) jacks 12. FM ANTENNA terminal 13. OPTICAL IN jacks You must connect your TV to HDMI OUT or MONITOR OUT to watch images from the selected input.
  • Page 22 14. PURE DIRECT The indicator above the button lights up when the Pure Direct function is activated. [7] Parts and Controls Receiver (STR-DN860) Front panel (STR-DN860) (lower section) 1. PHONES jack Connect headphones here. 2. AUTO CAL MIC jack (USB) port 4.
  • Page 23 When [Bluetooth Standby] is activated, the indicator only lights in amber when a device has been paired with the receiver. If there are no devices paired with the receiver, the indicator turns off when the receiver is in standby mode. For USA, Canadian and Asia-Pacific models only.
  • Page 24 7. Tuning indicator Lights up when the receiver tunes to a stereo broadcast. 8. HDMI OUT A + B (for STR-DN1060 only) 9. SLEEP Lights up when the sleep timer is activated. 10. EQ Lights up when the equalizer is activated.
  • Page 25 1. COAXIAL IN jack 2. HDMI IN/OUT (*) jacks 3. Wireless LAN antenna 4. LAN port (**) 5. SPEAKERS terminals 6. SUBWOOFER OUT jacks 7. AUDIO IN jacks 8. VIDEO IN/OUT (*) jacks 9. FM ANTENNA terminal 10. OPTICAL IN jacks You must connect your TV to HDMI OUT or MONITOR OUT to watch images from the selected input.
  • Page 26 Set [Control for HDMI], [Remote Start], [Bluetooth Standby] and [Quick Start/Network Standby] (*) to [Off]. Turn off the power for Zone 2, Zone 3 and HDMI zone. (for STR-DN1060 only) 2. Input buttons Select the input channel connected to the device you want to use.
  • Page 27 6. WATCH, LISTEN Select [Watch] or [Listen] on the home menu directly. When pressing these buttons on the Watch or Listen screen, you can move the focus to select the desired input. 7. CUSTOM PRESET (1, 2, 3) Saves and recalls various settings for the receiver. Press to select the custom preset setting(s).
  • Page 28 Displays the menu to operate the receiver. Press to select the menu items. Then press to enter the selection. 3. OPTIONS Display and select items from the options menus. 4. HOME Displays the home menu on the TV screen. (*), Skip, play, pause, stop operation.
  • Page 29 Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right) Surround back speaker (Left) Surround back speaker (Right) Subwoofer When using a 6.1-channel connection The following illustration is an example of an arrangement with only one surround back speaker.
  • Page 30 Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. [14] Preparation 1. Installing speakers Installing 7.1-channel speaker system using front high speakers You can enjoy vertical sound effects by connecting additional two front high speakers. Front speaker (Left) Front speaker (Right) Center speaker...
  • Page 31 Front high speaker (Right) Subwoofer 1. Place the front high speakers at an angle between 25° and 35°. 2. Place the front high speakers at height angle of 20° ± 5°. Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want.
  • Page 32 [16] Preparation 1. Installing speakers Installing speakers in other rooms (Zone 2/Zone 3) (for STR-DN1060 only) When listening in main zone and Zone 2 If the main zone speakers are connected using a 5.1ch connection, you can also enjoy the...
  • Page 33 Front speaker (Left) Front speaker (Right) Center speaker Surround speaker (Left) Surround speaker (Right) Subwoofer Zone 2 speaker (Left) Zone 2 speaker (Right) Hint As the subwoofer does not emit highly directional signals, you can place it wherever you want. When listening in main zone, Zone 2 and Zone 3 If the main zone speakers are connected using a 3.1ch connection, you can also enjoy audio in two or more locations (“Zone 2”...

  • Page 34: Connecting Speakers

    Front speaker (Left) Front speaker (Right) Center speaker Subwoofer Zone 2 speaker (Left) Zone 2 speaker (Right) Zone 3 speaker (Left) Zone 3 speaker (Right) [17] Preparation 2. Connecting speakers Connecting speakers Connect each speaker as illustrated below. Be sure to disconnect the AC power cord (mains lead) before connecting cables. For details on how to connect speaker cables to the receiver, see “How to connect speaker cables.”...
  • Page 35 Monaural audio cable (not supplied) Speaker cable (not supplied) If you connect a subwoofer with an auto standby function, turn off this function when watching movies. If the auto standby function is turned on, it switches to standby mode automatically based on the level of the input signal to the subwoofer, and the sound may not be output.
  • Page 36 2. Connecting speakers Connecting the speakers in Zone 2 and/or Zone 3 (for STR-DN1060 only) You can enjoy sound from a device connected to the receiver in a zone other than the main zone. For example, it is possible to play a CD in Zone 2 while playing a DVD in the main zone.

  • Page 37: Bi-Amplifier Connections

    Connecting the speakers in Zone 3 Speakers Speaker cable (not supplied) Note When using this Zone 3 connection, you need to set up the SPEAKERS SURROUND/ZONE 3 terminals. Only audio signals from [USB], [Bluetooth] (while in BLUETOOTH RX mode only), [Home Network], [Music Services], [FM TUNER] and audio signals input from AUDIO IN jacks are output to the Zone 3 speakers.

  • Page 38: Using The Menu On The Tv

    [20] Preparation 3. Connecting a TV Connecting a TV (for STR-DN1060) Connect a TV to the HDMI OUT or MONITOR OUT jack. You can operate this receiver using the menu on the TV screen when you connect the TV to the HDMI OUT A (TV) jack.
  • Page 39 Optical digital cable (not supplied) Audio cable (not supplied) HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Connecting a TV compatible with the Audio Return Channel (ARC) function via an HDMI connection With just one HDMI cable connection, you can listen to the TV audio from the speakers connected to the receiver while the receiver sends audio and video to the TV.
  • Page 40 Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Note For this connection, you need to turn the Control for HDMI function on. Press HOME to display the home menu, select [Setup] - [HDMI Settings], and set [Control for HDMI] to [On].
  • Page 41 Component video cable (not supplied) Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI OUT A (TV), HDMI OUT B/HDMI ZONE or MONITOR OUT jack on the receiver. Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted.
  • Page 42 It is not necessary to connect all the cables. HDMI connection for audio/video signals is required. Optical digital cable (not supplied) Audio cable (not supplied) HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony.
  • Page 43 TV. HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Note For this connection, you need to turn the Control for HDMI function on. Press HOME to display the home menu, select [Setup] - [HDMI Settings], and set [Control for HDMI] to [On].

  • Page 44: Connecting A 4K Tv

    Video cable (not supplied) Audio cable (not supplied) Optical digital cable (not supplied) Note Connect a TV monitor or a projector to the HDMI TV OUT or MONITOR OUT jack on the receiver. Depending on the status of the connection between the TV and the antenna (aerial), the image on the TV screen may be distorted.
  • Page 45 HDCP 2.2 on the TV and player. For details on whether the TV and player are equipped with HDCP 2.2-compatible HDMI jack, refer to the operating instructions of the connected device. For STR-DN1060 only. For STR-DN860 only. When an HDCP 2.2 compatible HDMI jack on the TV is labeled “ARC” (*)

  • Page 46: Notes On Connecting Cables

    Optical digital cable (not supplied) HDMI cable (not supplied) [23] Preparation 3. Connecting a TV Notes on connecting cables Be sure to disconnect the AC power cord (mains lead) before connecting cables. It is not necessary to connect all of the cables. Connect cables according to the availability of jacks on the connected device.
  • Page 47 3. Connecting a TV About HDMI connections High-Definition Multimedia Interface (HDMI) is an interface that transmits video and audio signals in digital format. Connecting Sony “BRAVIA” Sync-compatible devices using HDMI cables simplifies operations. HDMI features Digital audio signals transmitted by HDMI can be output from the speakers connected to the receiver.
  • Page 48 To watch content protected by HDCP 2.2, such as 4K content, connect these HDMI jacks to jacks that support HDCP 2.2 on the TV and player. Refer to the operating instructions of the connected device for details. HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony.
  • Page 49 Super Audio CD player, CD player Blu-ray Disc player, DVD player DVD recorder Game console such as PlayStation4 Cable box or satellite box Hint This HDMI connection is an example. You can connect each HDMI device to any HDMI input, including the HDMI input on the front panel. The BD/DVD and SA-CD/CD inputs have better sound quality.
  • Page 50 HDMI cable (not supplied) Sony recommends that you use an HDMI-authorized cable or HDMI cable made by Sony. Super Audio CD player, CD player Blu-ray Disc player, DVD player DVD recorder Game console such as PlayStation4 Cable box or satellite box Hint This HDMI connection is an example.
  • Page 51 Connect devices to the receiver as illustrated below. Solid lines show recommended connections and the dashed lines show alternative connections. It is not necessary to connect all the cables. Be sure to disconnect the AC power cord (mains lead) before connecting cables. Optical digital cable (not supplied) Audio cable (not supplied) Component video cable (not supplied)
  • Page 52 The image quality depends on the connecting jack. We recommend that you connect your devices via an HDMI connection if they have HDMI jacks. [28] Preparation 4. Connecting audio-visual devices and the antennas (aerials) Connecting devices with jacks other than HDMI jacks (for STR-DN860) Connect devices to the receiver as illustrated below.

  • Page 53: Connecting An Iphone, Ipod, Or Usb Device

    Optical digital cable (not supplied) Audio cable (not supplied) Video cable (not supplied) Coaxial digital cable (not supplied) Hint You can rename each input so that the name can be displayed on the display panel of the receiver. For details, see “Changing the name for each input (Name).” The image quality depends on the connecting jack.

  • Page 54: Connecting The Antenna (Aerial)

    Front (for STR-DN1060 only) The HDMI/MHL (VIDEO 2 IN) jack supports MHL 2 technology. Rear The HDMI IN SAT/CATV (MHL) jack supports MHL 3 technology. Mobile device MHL cable (not supplied) We recommend using an MHL 3-compatible cable to connect a mobile device that supports 4K output.
  • Page 55 FM wire antenna (aerial) (supplied) Note Be sure to fully extend the FM wire antenna (aerial). After connecting the FM wire antenna (aerial), keep it as horizontal as possible. [32] Preparation 4. Connecting audio-visual devices and the antennas (aerials) Connecting another amplifier in Zone 2 (for STR- DN1060 only) You can enjoy sound from a device connected to the receiver in a zone other than the main zone.

  • Page 56: Digital Audio Formats Supported By The Receiver

    Connecting another amplifier or TV in the HDMI zone (for STR-DN1060 only) HDMI input video/audio signals are output in HDMI zone using the HDMI OUT B/HDMI ZONE jack of the receiver. Speakers Amplifier/receiver HDMI cable (not supplied) Note To use this connection, set [HDMI Out B Mode] in the HDMI Settings menu to [Zone].
  • Page 57 For details, refer to the operating instructions of the playback device. These formats are compatible with MHL when you connect an MHL-compatible source device to the HDMI/MHL (VIDEO 2 IN) (for STR-DN1060 only) or HDMI IN SAT/CATV (MHL) jack. This format is not output to wireless headphones.
  • Page 58 4. Connecting audio-visual devices and the antennas (aerials) About HDMI connections High-Definition Multimedia Interface (HDMI) is an interface that transmits video and audio signals in digital format. Connecting Sony “BRAVIA” Sync-compatible devices using HDMI cables simplifies operations. HDMI features Digital audio signals transmitted by HDMI can be output from the speakers connected to the receiver.

  • Page 59: About Mhl (Mobile High-Definition Link) Connections

    Protection System Revision 2.2 (HDCP 2.2). Connect these HDMI jacks to jacks that support HDCP 2.2 on the TV and device. Refer to the operating instructions of the connected device for details. For STR-DN1060 only. For STR-DN860 only. Note Depending on the TV or video device, 4K or 3D images may not be displayed. Check the HDMI video formats supported by the receiver.
  • Page 60 cable (for wired LAN connections only) The following illustration is an example configuration of a home network with the receiver and a server. We recommend that you connect the server to the router with a wired connection. Server (computer, etc.) LAN cable (not supplied) Router Modem...

  • Page 61: Inserting Batteries Into The Remote

    Server (computer, etc.) Router Modem Internet Note Audio playback on a server may occasionally be interrupted if you use a wireless connection. When using Screen mirroring, BLUETOOTH TX or BLUETOOTH RX function, stand up both wireless LAN antennas for better performance. [40] Preparation 6.

  • Page 62: Turning On The Receiver

    Do not expose the remote control sensor to direct sunlight or lights. Doing so may cause a malfunction. If you do not intend to use the remote control for an extended period of time, remove the batteries to avoid possible damage from battery leakage and corrosion. When the receiver no longer responds to the remote control, replace both of the batteries with new ones.

  • Page 63: About Auto

    After you turn off the receiver, [STANDBY] flashes on the display panel. Do not disconnect the AC power cord (mains lead) while [STANDBY] is flashing. This may cause a malfunction. [42] Preparation 7. Setting up the receiver using Easy Setup Setting up the receiver using Easy Setup When you turn on the receiver for the first time or after the receiver is initialized, the Easy Setup screen appears on the TV screen.

  • Page 64: Before You Perform Auto

    The measurement result may be not utilized, depending on the audio formats. Note The D.C.A.C. is designed to achieve proper sound balance for your room. However, you can adjust the speaker levels manually according to your preference using [Test Tone]. [44] Preparation Tips for automatic calibration (Auto Calibration) 2.

  • Page 65: Selecting The Front Speakers

    Optimizer microphone (supplied) 1. Connect the supplied optimizer microphone to the AUTO CAL MIC jack. 2. Set up the optimizer microphone. Place the optimizer microphone where you will sit and set it at the same height as your ears. [46] Preparation Tips for automatic calibration (Auto Calibration) 4.

  • Page 66: Performing Auto

    HIGH/FRONT B terminals. SP A+B (*): Speakers connected to both the SPEAKERS FRONT A and SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals (parallel connection). (None): [SPK OFF] appears on the display panel. No audio signals are output from any speaker terminals. To select [SP B] or [SP A+B], set the assignment for the SPEAKERS SURROUND BACK/BI- AMP/FRONT HIGH/FRONT B terminals to [Front B] by using [Sur Back SP Assign] in the Speaker Settings menu.
  • Page 67 If an error code or warning message appears on the screen in step 3, see “List of messages after Auto Calibration measurements.” This setting is not available when headphones are connected. Hint The Auto Calibration function will be canceled if you perform the following during the measurement process: Press Press the input buttons on the remote control or turn INPUT SELECTOR on the receiver.

  • Page 68: Enjoying Video And Sound

    of messages after Auto Calibration measurements.” Hint The measurement results may vary depending on the position of the subwoofer. However, continuing to use the receiver with that value does not cause problems. [49] Enjoying Video and Sound Playing AV devices Enjoying Video and Sound This topic explains the operations you can use to enjoy movies and music with this receiver.

  • Page 69: Enjoying Video/Sound From The Connected

    Enjoying audio content from iTunes or an iPhone/iPad/iPod via the network (AirPlay) BLUETOOTH devices Enjoying audio content from an iPhone/iPod or other smartphone You can transmit audio from an iPhone/iPod or other smartphone to the receiver via BLUETOOTH. Enjoying audio content using the BLUETOOTH function (Pairing operation) Listening with BLUETOOTH headphones The BLUETOOTH TX function lets you enjoy listening to audio using BLUETOOTH headphones.
  • Page 70 You can display the menu of the receiver on the TV screen (*). For STR-DN1060, this is only possible when the TV is connected to the HDMI OUT A (TV) jack. 1. Switch the input of the TV to the input to which the receiver is connected.
  • Page 71 Depending on the TV, the home menu may take some time to appear on the TV screen. 3. Select [Watch] or [Listen] from the home menu. The menu item list appears on the TV screen. 4. Select the device you want. 5.

  • Page 72: Watching Hdcp 2.2 Copyright-Protected

    Enjoying sound of an ARC (Audio Return Channel) compatible TV If your TV supports the Audio Return Channel (ARC) function, set the receiver by the following procedure to output the sound of the TV from the speakers connected to the receiver.

  • Page 73: Usb Port

    USB port You can enjoy music from an iPhone/iPod by connecting it to the (USB) port on the receiver. 1. Select [Watch] or [Listen] - [USB] from the home menu. When the iPhone/iPod is connected, a list of its contents appears on the TV screen. You can operate the iPhone/iPod using the remote control of the receiver.
  • Page 74 1. Tap/click icon on the iPhone/iPad/iPod screen or iTunes window. 2. Select [STR-DN1060 XXXXXX] (*) or [STR-DN860 XXXXXX] (*) on the AirPlay menu of iTunes or your iPhone/iPad/iPod. 3. Start playing back audio content on an iPhone/iPad/iPod or in iTunes.
  • Page 75 For details, refer to the operating instructions of your BLUETOOTH device. A list of detected devices may appear on the BLUETOOTH device display depending on the type of BLUETOOTH device. This receiver is displayed as [STR-DN1060] or [STR-DN860]. 4. Select [STR-DN1060] or [STR-DN860] on the BLUETOOTH device display.
  • Page 76 Playing content from an iPhone/iPad/iPod Notes on iPhone/iPad/iPod Sony cannot accept responsibility in the event that data recorded to an iPhone/iPad/iPod is lost or damaged when using an iPhone/iPad/iPod connected to this receiver. iPhone/iPod is charged when connected to the receiver while the receiver is turned on.
  • Page 77 You cannot transfer songs onto the iPhone/iPad/iPod from the receiver. Do not remove the iPhone/iPad/iPod during operation. To avoid data corruption and damage to the iPhone/iPad/iPod, turn the receiver off when connecting or removing the iPhone/iPad/iPod. [59] Enjoying Video and Sound Playing content from a USB device Enjoying content stored on a USB device You can enjoy music/photos from a USB device by connecting it to the...
  • Page 78 USB specifications and Compatible USB devices File formats playable via USB connection Supported music formats (*1) MP3 (MPEG 1 Audio Layer-3) (*2): .mp3 AAC/HE-AAC: .m4a, .aac, .mp4 (*3), .3gp (*3) WMA9 Standard: .wma WMA 10 Pro (*4): .wma LPCM (*2): .wav FLAC: .flac, .fla...
  • Page 79 HDD), Still Image Capture Devices (SICDs), and 101-key keyboards. Compatible USB device Mass Storage Class, High-speed type Maximum current 500 mA Verified Sony USB devices You can use the following Sony USB devices on this receiver: Walkman: NWZ-W263/W274S NWZ-E375/E385/E465/E575/E585 NWZ-S765/S775 NWZ-A867...
  • Page 80 NWZ-B173F/B183F NWZ-F806/F887 NWZ-ZX1 NWZ-A15/A17 NWZ-WS613/WS615 NWZ-M504 MICROVAULT: USM4GL/USM8GL/USM32GL USM4GM USM8GN/USM32GN USM8GQ/USM32GQ/USM64GQ USM32GLX/USM64GLX USM8GR/USM16GR/USM32GR USM64GP USM8GT USM16GU USM4GV USM8GQX/USM128GQX USM32W USM16SA1 USM32X Digital Voice Recorder: ICD-UX502/UX523F/UX534F/UX544F ICD-TX50/TX650 ICD-FX8 ICD-PX232/PX440 ICD-BX332 ICD-SX733 ICZ-R51/R100/R250TV PCM-D100 Note The receiver is unable to read data other than that saved in the first partition of a hard disk drive.

  • Page 81: Notes On Usb Devices

    Creating Library or Creating Database on the USB device has disappeared. [61] Enjoying Video and Sound Playing content from a USB device Notes on USB devices Do not remove a USB device during operation. To avoid data corruption and damage to the USB device, turn the receiver off when connecting or removing a USB device.
  • Page 82 The FM screen appears. FM screen You can select and operate each item on the screen by pressing A: Frequency indication You can tune to a station automatically by pressing repeatedly (Auto Tuning). Press to scan from lower to higher frequency stations or press to scan from higher to lower frequency stations.
  • Page 83 You can store stations as follows: FM band: FM 1 to FM 30 [64] Enjoying Video and Sound Listening to the radio Naming preset stations (Name Input) 1. Select [Listen] - [FM TUNER] from the home menu. 2. Select the preset number to which you want to assign a name. 3.
  • Page 84 2. Confirm that the frequency indication on the left of the screen is highlighted and press 3. Enter the frequency using i. Press to select a digit. ii. Press to change the digit. 4. Press Note If the tuned frequency is invalid or out of range, [---.-- MHz] appears and then the screen returns to the current frequency.
  • Page 85 Note RDS may not work properly if the station you tuned to does not transmit the RDS signal or if the signal strength is weak. Some letters that can be displayed on the TV screen cannot be displayed on the display panel.

  • Page 86: Resetting Sound Fields To The Default Settings

    [68] Enjoying Video and Sound Enjoying sound effects Resetting sound fields to the default settings Be sure to use the buttons on the receiver to perform this operation. 1. Turn off the receiver. 2. Hold down MUSIC and press (on/standby) on the receiver. [S.F.
  • Page 87 Note This function does not work in the following cases: [Analog Direct] is being used. [Pure Direct] is set to [On]. [Bluetooth Mode] is set to [Transmitter]. Frequencies for [Bass] and [Treble] are fixed. Depending on the audio format, the receiver may play signals at a lower sampling frequency than the original sampling frequency of the input signals.
  • Page 88 frequency of the input signals, depending on the audio format. Hint You can also select [Sound Optimizer] in [Sound Effects] from the home menu. [71] Enjoying Video and Sound Enjoying sound effects Enjoying more natural sound with speakers installed in the ceiling (In-Ceiling Speaker Mode) Set whether or not to use in-ceiling speaker mode with the current input.

  • Page 89: Screen Mirroring

    [72] Enjoying Video and Sound Enjoying sound effects Enjoying high-fidelity sound (Pure Direct) You can enjoy higher-fidelity sound from all inputs using the Pure Direct function. When the Pure Direct function is on, the display panel lights off to suppress noise that affects sound quality.
  • Page 90 You can connect the receiver directly with a device that supports Screen mirroring (e.g. a smartphone, or a tablet) and display the screen of the device on your large TV screen. No wireless router (or access point) is required to use this feature. 1.
  • Page 91 You can control your receiver wirelessly by installing the TV SideView App on your smartphone or tablet device. We highly recommend this App for customers who use a TV manufactured by Sony with the receiver. Registering TV SideView device to the receiver...

  • Page 92: Setting Up A Wired Lan Connection

    Enjoying music services offered on the Internet [75] Using Network Features Setting up a wired LAN connection (for wired LAN connections only) Connecting the receiver to the network using a LAN cable (for wired LAN connections only) The following illustration is an example configuration of a home network with the receiver and a server.
  • Page 93 The screen for selecting the IP address acquisition method appears on the TV screen. 4. Select [Auto]. The system starts connecting to the network. The confirmation screen appears. 5. Press to browse information, and then press 6. Select [Save & Connect]. The system starts connecting to the network.
  • Page 94 Server (computer, etc.) Router Modem Internet Note Audio playback on a server may occasionally be interrupted if you use a wireless connection. When using Screen mirroring, BLUETOOTH TX or BLUETOOTH RX function, stand up both wireless LAN antennas for better performance. [78] Using Network Features Setting up a wireless LAN connection (for wireless LAN connections only)
  • Page 95 1. Select [Setup] - [Network Settings] from the home menu. 2. Select [Internet Settings]. 3. Select [Wireless Setup(built-in)]. 4. Select [Wi-Fi Protected Setup (WPS)]. 5. Select [Start]. 6. Press the WPS button on the access point. The receiver starts connecting to the network. After the network settings are complete, [ ] lights up on the display panel.

  • Page 96: Deleting A Server From The Server List

    Server (computer, etc.) 1. Select [Listen] - [Home Network] from the home menu. A list of available servers appears on the TV screen. If the last selected item (playlist, album, folder, etc.) appears on the TV screen, press BACK to return to the server list. If there are no available servers, press OPTIONS in the [Connection Server Settings] screen in the Network Settings menu and then select [Update Server List].
  • Page 97 1. Select [Setup] - [Network Settings] from the home menu. 2. Select [Connection Server Settings]. 3. Select the server which you want to delete and press OPTIONS. 4. Select [Remove] from the options menu. 5. Select [OK] on the confirmation display. [The device has been removed from the list.] appears on the TV screen, and the selected server is deleted.
  • Page 98 Compatible iPhone/iPad/iPod models You can use the following iPhone/iPad/iPod models on this receiver. Update your iPhone/iPad/iPod with the latest software before using it. USB works with iPhone: iPhone 6 Plus/iPhone 6/iPhone 5s/iPhone 5c/iPhone 5/iPhone 4s/iPhone 4/iPhone 3GS/iPhone 3G iPod touch: iPod touch (2nd through 5th generation) iPod: iPod classic...

  • Page 99: Enjoying Music Services Offered On The Internet

    1. Tap/click icon on the iPhone/iPad/iPod screen or iTunes window. 2. Select [STR-DN1060 XXXXXX] (*) or [STR-DN860 XXXXXX] (*) on the AirPlay menu of iTunes or your iPhone/iPad/iPod. 3. Start playing back audio content on an iPhone/iPad/iPod or in iTunes.
  • Page 100 Controlling the receiver using a smartphone or tablet device (SongPal) “SongPal” is a dedicated app for operating SongPal-compatible audio devices manufactured by Sony using a smartphone or tablet device. Search for “SongPal” on Google Play or the App Store and download to your smartphone or tablet device.
  • Page 101 You can enjoy music stored on your computer or smartphone or from music services in multiple rooms at the same time. Refer to the following for details of SongPal Link: http://www.sony.net/nasite [87] Using Network Features Using TV SideView to control the receiver from a...
  • Page 102 before you use TV SideView for the first time. Search for TV SideView on Google Play or the App Store and download to your mobile device. 1. Download TV SideView app to your mobile device. 2. Turn on the receiver and then connect it to the same network as your mobile device. 3.
  • Page 103 2. Select [Registered Remote Devices]. 3. Select the device you want to delete and press OPTIONS. 4. Select [Remove] from the options menu. 5. Select [OK]. The selected device is deleted from the device list. [90] Using Network Features Using Google Cast™ to enjoy audio content from a smartphone or tablet device Using Google Cast™...
  • Page 104 2. Select [Renderer Access Control]. A list of registered controllers appears (up to 40 devices). 3. Select the controller you want to set and press 4. Select the setting you want. Allow: Permits access from the controller. Block: Blocks access from the controller. [92] Using Network Features Setting whether to control this receiver from a device on the home network...
  • Page 105 3. Select the device you want to delete and press OPTIONS. 4. Select [Remove] from the options menu. 5. Select [OK]. The selected device is deleted from the device list. [94] Using BLUETOOTH Features About BLUETOOTH Features What you can do with BLUETOOTH features RX (Receiver mode) Listening to the audio content from a BLUETOOTH device on the receiver You can receive audio from an iPhone/iPod, smartphone or tablet that has a BLUETOOTH...

  • Page 106: Enjoying Audio Content Stored On A Bluetooth Device

    headphones closer to receiver if sound is intermittent. Listening with BLUETOOTH headphones (Pairing operation) See "Compatible BLUETOOTH version and profiles" for details on BLUETOOTH device versions and profiles that can be paired. [95] Using BLUETOOTH Features Enjoying audio content stored on a BLUETOOTH device Enjoying audio content stored on a BLUETOOTH device with a one-touch connection (NFC)
  • Page 107 For details, refer to the operating instructions of your BLUETOOTH device. A list of detected devices may appear on the BLUETOOTH device display depending on the type of BLUETOOTH device. This receiver is displayed as [STR-DN1060] or [STR-DN860]. 4. Select [STR-DN1060] or [STR-DN860] on the BLUETOOTH device display.
  • Page 108 If [STR-DN1060] or [STR-DN860] is not displayed, repeat this process from step 1. 5. When the BLUETOOTH connection is established, the device name appears and [BT] lights in the display panel. 6. Start playback on the BLUETOOTH device. 7. Adjust the volume.

  • Page 109: Compatible Bluetooth Version And Profiles

    If you press when no BLUETOOTH device is connected, the receiver automatically connects to the last connected BLUETOOTH device. Note These operations may not be available for certain BLUETOOTH devices. The actual operations may also differ depending on the connected BLUETOOTH device. The RX/TX button does not function while the BLUETOOTH function or Screen mirroring function are in use or when [Bluetooth Mode] is set to [Off].
  • Page 110 1. Select [Transmitter] in [Bluetooth Mode] from the Bluetooth Settings menu. 2. Turn on the BLUETOOTH function on the BLUETOOTH headphones. 3. Select the name of the BLUETOOTH headphones from the [Device List] in the Bluetooth Settings menu. If you cannot find the name of your BLUETOOTH headphones in the list, select [Scan]. 4.
  • Page 111 Controlling the receiver using a smartphone or tablet device (SongPal) “SongPal” is a dedicated app for operating SongPal-compatible audio devices manufactured by Sony using a smartphone or tablet device. Search for “SongPal” on Google Play or the App Store and download to your smartphone or tablet device.
  • Page 112 Refer to the following for details of SongPal Link: http://www.sony.net/nasite [103] Using the Multi-Zone Features (for STR-DN1060 only) Overview of multi-zone features (for STR-DN1060 only) What you can do with multi-zone features (for STR- DN1060 only) Listening in two locations ―...
  • Page 113 2 terminals. For example, you can listen to the same music from an AV device located in the living room in both the living room and kitchen, or watch a movie in the living room while music from a different device is played in the kitchen. The volume can be adjusted separately for each room.
  • Page 114 Note There are restrictions on the audio sources that can be used in Zone 2/3. For details, see “Available inputs for each zone (for STR-DN1060 only).” [104] Using the Multi-Zone Features (for STR-DN1060 only) Overview of multi-zone features (for STR-DN1060 only) Available inputs for each zone (for STR-DN1060 only) Available inputs vary depending on the zone you have selected.
  • Page 115 SAT/CATV: Source signal from the HDMI IN SAT/CATV jack Source signal from the VIDEO/AUDIO IN SAT/CATV jacks Source signal from the COMPONENT VIDEO IN SAT/CATV jacks Source signal from the OPTICAL IN 1 (SAT/CATV) jack GAME: Source signal from the HDMI IN GAME jack SA-CD/CD: Source signal from the HDMI IN SA-CD/CD jack Source signal from the COAXIAL IN SA-CD/CD jack...
  • Page 116 Source signal from the AUDIO IN SAT/CATV jacks VIDEO 1: Source signal from the AUDIO IN VIDEO 1 jacks SA-CD/CD: Source signal from the AUDIO IN SA-CD/CD jacks FM TUNER: FM broadcasts received through the built-in tuner USB (*): Source signal from the (USB) port on the front panel Bluetooth (*): Source signal received via BLUETOOTH...
  • Page 117 [105] Using the Multi-Zone Features (for STR-DN1060 only) Enjoying sound from speakers located in other rooms (for STR-DN1060 only) 1.
  • Page 118 Speakers Speaker cable (not supplied) Note When using this Zone 2 connection, you need to set up the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2 terminals. Only audio signals from [USB], [Bluetooth] (while in BLUETOOTH RX mode only), [Home Network], [Music Services], [FM TUNER] and audio signals input from AUDIO IN jacks are output to the Zone 2 speakers.
  • Page 119 Enjoying sound from speakers located in other rooms (for STR-DN1060 only) 2. Assigning speakers for Zone 2 (for STR-DN1060 only) You can assign the speakers installed in Zone 2 as Zone 2 speakers. Follow the procedure below after connecting the speakers installed in Zone 2 to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B/ZONE 2 terminals of the receiver.
  • Page 120 You cannot set the SURROUND/ZONE 3 terminals for a Zone 3 connection if a speaker pattern with surround speakers is set. [108] Using the Multi-Zone Features (for STR-DN1060 only) Enjoying sound from speakers located in other rooms (for STR-DN1060 only) 4.
  • Page 121 [109] Using the Multi-Zone Features (for STR-DN1060 only) Enjoying sound from speakers located in other rooms using another amplifier (for STR-DN1060 only) 1. Connecting another amplifier in Zone 2 (for STR- DN1060 only) You can enjoy sound from a device connected to the receiver in a zone other than the main zone.
  • Page 122 Zone 2. [110] Using the Multi-Zone Features (for STR-DN1060 only) Enjoying sound from speakers located in other rooms using another amplifier (for STR-DN1060 only) 2. Setting the volume control for Zone 2 (Zone2 Line Out) (for STR-DN1060 only) You can set variable or fixed volume control for the ZONE 2 AUDIO OUT jacks.
  • Page 123 [112] Using the Multi-Zone Features (for STR-DN1060 only) Enjoying video and sound in another room using a TV or another receiver (for STR-DN1060 only) 1. Connecting another amplifier or TV in the HDMI zone (for STR-DN1060 only) HDMI input video/audio signals are output in HDMI zone using the HDMI OUT B/HDMI ZONE jack of the receiver.
  • Page 124 [113] Using the Multi-Zone Features (for STR-DN1060 only) Enjoying video and sound in another room using a TV or another receiver (for STR-DN1060 only) 2. Selecting the method to use the HDMI OUT B jack (HDMI Out B Mode) (for STR-DN1060 only) The HDMI OUT B/HDMI ZONE jack can be used for HDMI zone.
  • Page 125 (for STR-DN1060 only).” [114] Using the Multi-Zone Features (for STR-DN1060 only) Enjoying video and sound in another room using a TV or another receiver (for STR-DN1060 only) 3. Setting the priority for the main zone (Priority) (for STR-DN1060 only)
  • Page 126 TV or another receiver (for STR-DN1060 only) 4. Enjoying video and sound in another location by connecting another amplifier or TV using HDMI connections (HDMI zone) (for STR-DN1060 only) You can enjoy sound from the receiver in the HDMI zone by following the steps below.
  • Page 127 8. Repeat steps 6 and 7 for other devices for which you want to use the Control for HDMI function. Note Perform the steps above again if you unplug the HDMI cable or change the connection. This function works only when [HDMI Out B Mode] is set to [Main]. (for STR-DN1060 only)
  • Page 128 [118] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) Enjoying an input source from a connected device immediately (One-Touch Play) When you play content on a device connected to the receiver via an HDMI connection, the receiver is also automatically turned on and switched to the appropriate HDMI input.
  • Page 129 [120] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) Turning off the receiver and connected devices simultaneously with the TV (System Power-Off) If the TV, receiver and any connected devices are connected to each other via HDMI connections, you can turn them off simultaneously by pressing on the remote control of the TV.
  • Page 130 [122] Using Other Features Interlocking with BRAVIA TV and other devices (“BRAVIA” Sync) About Home Theatre Control If a Home Theatre Control-compatible TV is connected to the receiver, an icon for Internet based applications appears on the connected TV. You can switch an input of the receiver or switch sound fields by using the remote control of your TV.

  • Page 131: Remote Easy Control

    By connecting an MHL device with an MHL cable (not supplied), you can use One-Touch Play and Remote Easy Control. These functions allow communication with Sony “BRAVIA” Sync-compatible TVs using an HDMI cable (not supplied). Note These functions may not work depending on the connected MHL device.
  • Page 132 1. Turn on the receiver and the two monitors. 2. Press HDMI OUTPUT. Each time you press the button, the output will be switched as follows: HDMI A - HDMI B - HDMI A+B - HDMI OFF Note [HDMI A+B] may not work if the compatible video formats of the monitors connected to the HDMI OUT A (TV) jack and the HDMI OUT B/HDMI ZONE jack of the receiver are different.
  • Page 133 BD/DVD, GAME, SAT/CATV (*), VIDEO 1, VIDEO 2, SA-CD/CD None: BD/DVD (*), GAME (*), SAT/CATV, VIDEO 1 (*), VIDEO 2 (*), SA-CD/CD (*) Assignable audio input jacks OPT 1: STR-DN1060: BD/DVD, GAME, SAT/CATV (*), VIDEO 1, VIDEO 2, SA-CD/CD STR-DN860: BD/DVD, GAME, SAT/CATV (*), VIDEO, SA-CD/CD...

  • Page 134: About Custom Preset

    STR-DN1060: BD/DVD, GAME, SAT/CATV, VIDEO 1, VIDEO 2, SA-CD/CD (*) STR-DN860: BD/DVD, GAME, SAT/CATV, VIDEO, SA-CD/CD (*) None: STR-DN1060: BD/DVD (*), GAME (*), SAT/CATV, VIDEO 1 (*), VIDEO 2 (*), SA-CD/CD STR-DN860: BD/DVD (*), GAME (*), SAT/CATV, VIDEO (*), SA-CD/CD Default setting...

  • Page 135: Recalling The Settings Saved To The Scene

    [Import] from the menu. When you select [3: Party], Zone 2, Zone 3 and HDMI zone are turned on automatically allowing you to enjoy the same music that is playing in the main zone. (for STR-DN1060 only)
  • Page 136 1: Movie Input: BD/DVD Tuner Preset: – Volume: – HDMI Output: – Party Mode (for STR-DN1060 only): – Sleep: – Sound Field: HD-D.C.S. Sound Optimizer: – In-Ceiling Speaker Mode: – Pure Direct: – Calibration Type: –...
  • Page 137 Front High Treble: – 3: Party Input: – Tuner Preset: – Volume: 27 HDMI Output: – Party Mode (for STR-DN1060 only): On Sleep: Off Sound Field: Multi Stereo Sound Optimizer: Off In-Ceiling Speaker Mode: – Pure Direct: – Calibration Type: –...

  • Page 138: Viewing Information On The Display Panel

    Surround Bass: – Surround Treble: – Front High Bass: – Front High Treble: – [132] Using Other Features Using the sleep timer Using the sleep timer (Sleep) You can set the receiver to turn off automatically at a specified time. 1.
  • Page 139 1. Select the input for which you want to check information. 2. Press DISPLAY MODE on the receiver repeatedly. Each time you press DISPLAY MODE, the display will change cyclically as follows: Index name of the input (*1) - Input you selected - Sound field currently applied (*2) - Volume level - Stream information (*3) When listening to FM radio Preset station name (*1) - Frequency - Sound field currently applied (*2) - Volume level...
  • Page 140 If the Easy Setup screen does not appear or you want to display the Easy Setup screen manually, you can display it by selecting [Setup] - [Easy Setup] from the home menu. [135] Adjusting Settings Speaker Settings 1. About Auto Calibration Auto Calibration allows you to perform automatic calibration as follows.

  • Page 141: Connecting The Optimizer Microphone

    Note Auto Calibration is not available when [Bluetooth Mode] is set to [Transmitter]. The speakers emit very loud sound during the calibration and the volume cannot be adjusted. Be considerate of your neighbors and any children who are present. If the muting function has been activated before you perform Auto Calibration, the muting function will shut off automatically.

  • Page 142: Performing Auto Calibration

    The indicators on the display panel shows which set of terminals are selected. SP A : Speakers connected to the SPEAKERS FRONT A terminals. SP B (*): Speakers connected to the SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals. SP A+B (*): Speakers connected to both the SPEAKERS FRONT A and SPEAKERS SURROUND BACK/BI-AMP/FRONT HIGH/FRONT B terminals (parallel connection).
  • Page 143 3. Follow the instructions on the TV screen, then press to select [Start]. The measurement starts in 5 seconds. The measurement process will take approximately 30 seconds with a test tone. When the measurement ends, a beep sounds and the screen switches. 4.
  • Page 144 2. Follow the instructions on the TV screen and then press to select [Start]. The measurement starts in five seconds. The measurement process will take approximately 30 seconds with a test tone. When the measurement ends, a beep sounds and the screen switches. 3.

  • Page 145: Selecting The Auto Calibration Type (Calibration Type)

    3. Select the setting you want. Full Flat: Makes the measurement of frequency from each speaker flat. Engineer: Sets to “the Sony listening room standard” frequency characteristics. Front Reference: Adjusts the characteristics of all of the speakers to match the characteristics of the front speaker.
  • Page 146 only) You can select the speaker pattern for the SPEAKERS SURROUND terminals and set how to assign the terminals. 1. Select [Setup] - [Speaker Settings] from the home menu. 2. Select [Speaker Pattern]. 3. Select the desired speaker pattern according to the speaker installation example displayed on the TV screen, then select [Save].

  • Page 147: Adjusting The Speaker Size (Size)

    4. Set [Sur Back SP Assign] to any of the following settings (*). Zone2 (for STR-DN1060 only) When using the Zone 2 connection. Bi-Amp When using the bi-amplifier connection. Front B When using the front B speaker connection. When none of the connections above are used.

  • Page 148: Adjusting The Speaker Distance (Distance)

    Note [Size] cannot be set in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. Hint The surround back speakers will be set to the same setting as that of the surround speakers. When the front speakers are set to [Small], the center, surround, and surround back/front high speakers are also automatically set to [Small].

  • Page 149: Outputting A Test Tone From Each Speaker (Test Tone)

    You can adjust the level of each speaker (front left/right, front high left/right, center, surround left/right, surround back left/right and subwoofer). 1. Select [Setup] - [Speaker Settings] from the home menu. 2. Select [Level]. 3. Select the speaker on the screen for which you want to adjust the speaker level. 4.

  • Page 150: Crossover Frequency

    The adjusted value is shown on the TV screen during adjustment. To output a test tone from adjacent speakers See “Adjusting the balance between adjacent speakers by outputting a test tone (Phase Noise).” To output the source sound from adjacent speakers See “Adjusting the balance between adjacent speakers by outputting a source sound (Phase Audio).”...
  • Page 151 You can use the following parameters to adjust the tonal quality (bass/treble level) of the front, center, surround/surround back and front high speakers. Level (dB) Frequency (Hz) Bass Treble 1. Select [Setup] - [Speaker Settings] from the home menu. 2. Select [Equalizer]. 3.
  • Page 152 By using the front high speakers, you can lift up the sounds of the center speaker to an appropriate height on the screen, allowing you to enjoy natural sound without discomfort. 1. Select [Setup] - [Speaker Settings] from the home menu. 2.

  • Page 153: Selecting The Unit Of Measurement (Distance Unit)

    Playing audio signals with high-quality sound (Digital Legato Linear (D.L.L.)) The D.L.L. function is Sony proprietary technology that allows low-quality digital and analog audio signals to be played with high-quality sound. 1. Select [Setup] - [Audio Settings] from the home menu.
  • Page 154 This function may not work on some content via a USB device or home network. This function works when [2ch Stereo], [A.F.D.], [Multi Stereo] or [Headphone(2ch)] is selected. However, this function does not work in the following cases: The [In-Ceiling Speaker Mode] function is being used. [FM TUNER] is selected as the input.

  • Page 155: Selecting The Hd-D.c.s. Effect Type (Hd-D.c.s. Type)

    [156] Adjusting Settings Audio Settings Selecting a sound field (Sound Field) You can select from a variety of sound field modes according to speaker connections or input sources. 1. Select [Setup] - [Audio Settings] from the home menu. 2. Select [Sound Field]. 3.
  • Page 156 2. Select [HD-D.C.S. Type]. 3. Select the setting you want. Dynamic Theater Studio Note This function works only when the sound field is set to [HD-D.C.S. Type]. This function does not work in the following cases: Headphones are connected. [Bluetooth Mode] is set to [Transmitter]. [158] Adjusting Settings Audio Settings Enjoying more natural sound with speakers installed in...
  • Page 157 This function may not work depending on the audio format. The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals depending on the audio format. Hint You can also select [In-Ceiling Speaker Mode] in [Sound Effects] from the home menu. To obtain the optimal sound for your listening environment, configure the [Ceiling Speaker Height] setting in the Speaker Settings menu, then perform Auto Calibration.

  • Page 158: Subwoofer Low Pass Filter

    [160] Adjusting Settings Audio Settings Setting the low-pass filter for the subwoofer output (Subwoofer Low Pass Filter) You can turn the low-pass filter for the subwoofer output on or off. You can set the function for each input to which an audio input jack is assigned independently. Turn the function on if you connect a subwoofer without the crossover frequency function.
  • Page 159 available only when the monitor supports the A/V Sync function. 0 ms – 300 ms: You can adjust the delay from 0 ms to 300 ms in 10 ms intervals. Note The receiver may play signals at a lower sampling frequency than the actual sampling frequency of the input signals, depending on the audio format.

  • Page 160: Selecting The Language Of Digital Broadcasts (Dual Mono)

    Volume) This receiver can adjust its volume automatically depending on the input signal or content from a connected device. This function is useful, for example, when the sound of commercials is louder than a TV program. 1. Select [Setup] - [Audio Settings] from the home menu. 2.

  • Page 161: Setting The Screen Aspect Ratio Of The Tv (Tv Type)

    [165] Adjusting Settings Audio Settings Compressing the dynamic range (Dynamic Range Compressor) You can compress the dynamic range of the soundtrack. This may be useful when you want to watch movies at a low volume late at night, etc. This function only works for Dolby Digital and Dolby TrueHD sources. 1.

  • Page 162: Enjoying 4K Content (4K Output)

    Auto1: Outputs 2K (1920 × 1080) video signals during video playback and 4K video signals during photo play when connected to a 4K-compatible device made by Sony. Outputs 4K video signals during playback of 24p video contents or photo play when connected to a non-Sony 4K-compatible device.
  • Page 163 If your Sony device is not detected when [Auto1] is selected, the setting will have the same effect as the [Auto2] setting. The [4K Output] setting does not affect video signals from the HDMI IN jacks. If you want to upscale video signals from the HDMI IN jacks to 4K, use [HDMI In 4K Scaling] in HDMI Settings menu.
  • Page 164 2. Select [HDMI Deep Color Output]. 3. Select the setting you want. Auto 12bit: Outputs 12bit video signals if the connected TV is compatible with Deep Color. 10bit: Outputs 10bit video signals if the connected TV is compatible with Deep Color.

  • Page 165: Upscaling Video Signals To 4K (Hdmi In 4K Scaling)

    When the receiver is in standby mode, the (on/standby) indicator on the front panel lights up in amber if [Control for HDMI] is set to [On]. This function works only when [HDMI Out B Mode] is set to [Main]. (for STR-DN1060 only)

  • Page 166: Passing Hdmi Signals Through (Standby Through)

    When [Auto] is selected, it may take a little more time for the image and sound to be output to the TV than when [On] is selected. This function does not work for the HDMI OUT B/HDMI ZONE jack. (for STR-DN1060 only)

  • Page 167: Setting The Level Of The Subwoofer (Subwoofer Level)

    2. Select [Audio Out]. 3. Select the setting you want. AMP: HDMI audio signals from playback devices are only output to the speakers connected to the receiver. Multi-channel sound can be played back as it is. TV + AMP: The sound is output from the speaker of the TV and the speakers connected to the receiver.
  • Page 168 HDMI Settings Selecting the method to use the HDMI OUT B jack (HDMI Out B Mode) (for STR-DN1060 only) The HDMI OUT B/HDMI ZONE jack can be used for HDMI zone. 1. Select [Setup] - [HDMI Settings] from the home menu.
  • Page 169 3. Select the setting you want. Auto: You can select HDMI input faster than normal selection. Off: The Fast View function is not available. Note This function is enabled only when [HDMI Out B Mode] is set to [Main]. (for STR-DN1060...

  • Page 170: Changing The Assignment And Display For The Input Jacks

    You can change the settings of [Icon], [Name], [Watch / Listen], [Show / Hide], [OPTICAL / COAXIAL], [COMPONENT] (*) and [Input Mode] for each input. For STR-DN1060 only Note The settings of [HDMI], [VIDEO IN] and [AUDIO IN] on the Input Settings screen are fixed...
  • Page 171 You can set the digital audio input jack(s) assigned to each input. OPT 1 OPT 2 COAX None COMPONENT (for STR-DN1060 only) You can set the video input jack(s) assigned to each input. None Input Mode You can set the input mode for each input.
  • Page 172 You can enter up to 8 characters for each input name. 1. Select [Setup] - [Input Settings] from the home menu. 2. Select the input name you want to change. 3. Select [Name]. An on-screen keyboard appears on the TV screen. 4.
  • Page 173 See [Network Connection Status] when checking the network settings. [184] Adjusting Settings Network Settings Setting up a wireless LAN connection Before performing network settings When your wireless LAN router (access point) is Wi-Fi Protected Setup (WPS)-compatible, you can easily set the network settings with the WPS button. If not, you will be required to select or enter the following information.

  • Page 174: Connection Status

    If using a (WPS) PIN code Select [New connection registration] - [(WPS) PIN Method] in step 4, then follow the on- screen instructions. Hint See [Network Connection Status] when checking the network connection status. [185] Adjusting Settings Network Settings Checking the network connection status (Network Connection Status) You can check the current network connection status.
  • Page 175 mirroring (Screen mirroring RF Setting) If you are using multiple wireless systems such as wireless LANs (Local Area Networks), the wireless signals may be unstable. In this case, playback stability may be improved by setting the priority radio frequency channel for Screen mirroring. 1.
  • Page 176 1. Select [Setup] - [Network Settings] from the home menu. 2. Select [Auto Renderer Access Permission]. 3. Select the setting you want. [190] Adjusting Settings Network Settings Setting whether to control this receiver from a controller device on the home network (Renderer Access Control) You can check a list of products compatible with a controller on the home network and set whether or not each product is accessible via this receiver.
  • Page 177 2. Select [Registered Remote Devices]. Note You can register up to 5 TV SideView devices. If you want to add a new device when a maximum of 5 devices are set, remove unnecessary devices before adding the new device. [192] Adjusting Settings Network Settings Enabling the network function even when this receiver is in standby mode (Remote Start)
  • Page 178 [194] Adjusting Settings Bluetooth Settings Selecting the BLUETOOTH mode (Bluetooth Mode) You can enjoy contents from remote devices on this receiver or listen to sound from this receiver on other devices such as headphones. 1. Select [Setup] - [Bluetooth Settings] from the home menu. 2.
  • Page 179 Checking the BLUETOOTH device list (Device List) You can check a list of the paired and detected BLUETOOTH receivers when [Bluetooth Mode] is set to [Transmitter]. You can perform pairing with detected devices from the list. 1. Select [Setup] - [Bluetooth Settings] from the home menu. 2.
  • Page 180 Hint You can enjoy high-quality sound if AAC or LDAC is enabled. LDAC is an audio coding technology developed by Sony that enables the transmission of High-Resolution (Hi-Res) Audio content, even over a BLUETOOTH connection. Unlike other BLUETOOTH compatible coding technologies such as SBC, it operates without any...
  • Page 181 This function is only available when [Bluetooth Mode] is set to [Transmitter] and [Bluetooth Codec - LDAC] is set to [On]. [199] Adjusting Settings Zone Settings (for STR-DN1060 only) Turning the power for Zone 2/Zone 3/HDMI zone on/off (Power) (for STR-DN1060 only) You can turn the power for Zone 2/Zone 3/HDMI zone on or off by following the steps below.
  • Page 182 Zone 3 (for STR-DN1060 only)” When using the connections described in “1. Connecting another amplifier in Zone 2 (for STR-DN1060 only),” and when [Zone2 Line Out] is set to [Variable]. 1. Select [Setup] - [Zone Settings] from the home menu.
  • Page 183 [2. xxxx (input name)] or [3. xxxx (input name)] is shown on the display panel. [202] Adjusting Settings Zone Settings (for STR-DN1060 only) Setting the volume control for Zone 2 (Zone2 Line Out) (for STR-DN1060 only) You can set variable or fixed volume control for the ZONE 2 AUDIO OUT jacks.
  • Page 184 [203] Adjusting Settings System Settings Selecting the language (Language) (for USA, Canadian, European and Australian models only) You can select the language of messages on the screen. 1. Select [Setup] - [System Settings] from the home menu. 2. Select [Language]. 3.
  • Page 185 1. Select [Setup] - [System Settings] from the home menu. 2. Select [Quick Start/Network Standby]. 3. Select the setting you want. [206] Adjusting Settings System Settings Setting standby mode (Auto Standby) You can set the receiver to switch to standby mode automatically when you do not operate the receiver or when no signals are input to the receiver.
  • Page 186 1. Select [Setup] - [System Settings] from the home menu. 2. Select [Dimmer]. 3. Select the setting you want. 100% Hint You can also use the DIMMER button on the receiver. [208] Adjusting Settings System Settings Using the sleep timer (Sleep) You can set the receiver to turn off automatically at a specified time.

  • Page 187: Update Notification

    [209] Adjusting Settings System Settings Receiving information on newer software (Software Update Notification) You can set whether or not to be informed of newer software version information on the TV screen. 1. Select [Setup] - [System Settings] from the home menu. 2.
  • Page 188 Content input with the on-screen keyboard [211] Adjusting Settings System Settings Assigning a name to the receiver (Device Name) You can assign a device name to the receiver to make it easily recognizable by other devices. 1. Select [Setup] - [System Settings] from the home menu. 2.
  • Page 189 You can display the software license information. 1. Select [Setup] - [System Settings] from the home menu. 2. Select [Software License Information]. 3. Follow the on-screen instructions. [214] Adjusting Settings System Settings Updating the software automatically (Auto Update Settings) You can set the software to update automatically. If you set [Auto Update] to [On], the auto update is performed from 2:00 AM to 5:00 AM of the selected time zone.
  • Page 190 Updating the software (Software Update) 1. Select [Setup] - [System Settings] from the home menu. 2. Select [Software Update]. 3. Select [Update via Internet] or [Update via USB Memory]. If you select [Update via USB Memory], please visit the customer support website to download the latest software version.
  • Page 191 To return to the previous display Press or BACK. To exit the menu Press AMP MENU. Note Some parameters and settings may appear dimmed on the display panel. This means that they are either unavailable or fixed and unchangeable. [217] Adjusting Settings Using the menu on the display panel Viewing information on the display panel The display panel provides various information on the status of the receiver, such as the...

  • Page 192: Reverting To The Factory Default Settings

    After checking the above items and fixing any problems, plug in the AC power cord (mains lead) and turn on the receiver. If the problem persists, consult your nearest Sony dealer.

  • Page 193: List Of Messages After Auto Calibration Measurements

    [220] Troubleshooting Error messages An over-current from the USB port was detected. Disconnect all USB devices as prompted in the warning message and close the message. [221] Troubleshooting Error messages List of messages after Auto Calibration measurements Code 30: Headphones are connected to the PHONES jack on the receiver. Remove the headphones and perform the Auto Calibration again.

  • Page 194: The Receiver Is Turned Off Automatically

    Set your TV to the appropriate input mode. Move your audio device away from the TV. Assign the component video input correctly (for STR-DN1060 only). Make sure that cables are correctly and securely connected to devices. Some playback devices need to be set up. Refer to the operating instructions supplied with each device.

  • Page 195: No 3D Image Appears On The Tv

    [HDMI ON] (for STR-DN860 only). set to [HDMI A], [HDMI B], or [HDMI A + B] (for STR-DN1060 only). If you want to play HDCP 2.2 content, be sure to connect the device to the HDCP 2.2- compatible HDMI input and output of the receiver.

  • Page 196: The Display Panel Is Turned Off

    Press HOME to display the home menu. Check that the TV is connected correctly. The home menu may take some time to appear on the TV screen depending on the TV. For STR-DN1060 only For STR-DN860 only [229] Troubleshooting Image The display panel is turned off.

  • Page 197: There Is Severe Humming Or Noise

    Press to cancel the muting function. Try pressing the input button on the remote control or turning INPUT SELECTOR on the receiver to select the device of your choice. If you want to listen to sound from the TV speaker, set [Audio Out] to [TV + AMP] in the HDMI Settings menu.

  • Page 198: There Is No Sound From A Specific Device

    [Speaker Pattern] in the Speaker Settings menu. Then check that sound is output from each speaker correctly using [Test Tone] in the Speaker Settings menu. Some discs have no Dolby Digital Surround EX information. In this case, sound may not be output from some speakers.

  • Page 199: The Left And Right Sound Is Unbalanced Or Reversed

    When you connect the receiver to a video device (projector, etc.), sound may not be output from the receiver. In this case, set [Audio Out] to [AMP] in the HDMI Settings menu. You cannot listen to the sound of a device connected to the receiver while TV input is selected on the receiver.

  • Page 200: The Surround Effect Cannot Be Obtained

    [236] Troubleshooting Sound Dolby Digital or DTS multi-channel sound is not reproduced. Check that the DVD, etc. you are playing is recorded in Dolby Digital or DTS format. When connecting the DVD player, etc., to the digital input jacks of this receiver, make sure the digital audio output setting of the connected device is available.

  • Page 201: The Fm Reception Is Poor

    speaker pattern match correctly. [240] Troubleshooting Sound No sound is output from the TV when the receiver is in standby mode. When the receiver enters standby mode, sound is output from the last HDMI device selected before you turned off the receiver. If you are enjoying content from another device, play the content on the device and perform the One-Touch Play operation, or turn on the receiver to select the HDMI device from which you want to enjoy content.

  • Page 202: You Cannot Tune To Radio Stations

    Note You can set FM mode in the options menu if the frequency indication is selected in step [243] Troubleshooting Tuner You cannot tune to radio stations. Check that the antennas (aerials) are connected securely. Adjust the antennas (aerials) if necessary.

  • Page 203: The Sound Is Distorted

    [246] Troubleshooting iPhone/iPad/iPod The sound is distorted. Press - on the remote control repeatedly. You can also use MASTER VOLUME on the receiver. [247] Troubleshooting iPhone/iPad/iPod There is no sound from an iPhone/iPod. Disconnect the iPhone/iPod and connect it again. [248] Troubleshooting iPhone/iPad/iPod An iPhone/iPad/iPod cannot be charged.

  • Page 204: The Ringtone Volume Of An Iphone Does Not Change

    The ringtone volume of an iPhone does not change. Adjust the ring volume using the controls on the iPhone. [251] Troubleshooting USB devices Are you using a compatible USB device? If you connect an incompatible USB device, the following problems may occur. The USB device is not recognized.

  • Page 205: Playback Does Not Start

    [254] Troubleshooting USB devices Playback does not start. Turn off the receiver, reconnect the USB device, and then turn on the receiver. Connect a compatible USB device. Select [USB] and select a folder/track, then press to start playback. [255] Troubleshooting USB devices A USB device cannot be connected to the USB port.

  • Page 206: Lan Connection

    If you use a partitioned USB device, only audio files on the first partition can be played. Playback is possible up to nine levels (including the [ROOT] folder). There are more than 500 folders (including the [ROOT] folder). There are more than 500 files. Files that are encrypted, protected by passwords, etc.

  • Page 207: Cannot Control The Receiver Using A Tv Sideview Device

    It may take some time for the receiver to connect to the network after it is turned on. Try again later. The smartphone or tablet device may not be connected to the same network as the receiver. Connect to the same network and try again. Also see “Controller devices or applications on the home network cannot connect to the receiver.”...
  • Page 208 Make sure the router or the wireless LAN router/access point is turned on. The network settings on the receiver may be incorrect. If the connection failed, set up the network connection again. Confirm that the receiver is connected to the router or the wireless LAN router/access point correctly.

  • Page 209: The Sound Skips During Playback

    played on this receiver. Make sure that the repeat setting and shuffle setting are configured correctly. Press OPTION, then select [Repeat Setting] or [Shuffle Setting] from the options menu to set to the playback mode. [266] Troubleshooting Home Network The sound skips during playback. The bandwidth of your network may be too low.

  • Page 210: Cannot Select A Previously Selected Track

    [269] Troubleshooting Home Network Cannot select a previously selected track. The track information may have been changed on the server. Refresh the server list and then reselect the server. [270] Troubleshooting Home Network Controller devices or applications on the home network cannot connect to the receiver.

  • Page 211: The Sound Skips

    Set [Remote Start] to [On] if you want to turn the receiver on by operating the devices on a network. [272] Troubleshooting AirPlay The receiver cannot be found from an iPhone/iPad/iPod or iTunes. Make sure the iPhone/iPad/iPod or computer with iTunes is connected to your home network.

  • Page 212: Cannot Connect The Receiver To A Service

    Cannot connect the receiver to a service. Make sure that the router or the wireless LAN router/access point is turned on. Check [Network Connection Status]. If [Not accessible] or [Failed] appears, set up the network connection again. If the receiver is connected to a wireless network, move the receiver and the wireless LAN router/access point closer to each other.

  • Page 213: On The Receiver

    and cannot be connected with the receiver. Press BLUETOOTH on the receiver to connect to the last connected BLUETOOTH device. Turn on the BLUETOOTH function of the BLUETOOTH device. Establish a connection from the BLUETOOTH device. The pairing registration information has been erased. Perform the pairing operation again. While connected to a BLUETOOTH device, this receiver cannot be detected.

  • Page 214: The Control For Hdmi Function Does Not Work

    other BLUETOOTH device, or a microwave oven nearby, move it away. Turn down the volume of the connected BLUETOOTH device. [282] Troubleshooting BLUETOOTH device Cannot control the receiver using a “SongPal” device. It may take some time for the receiver to connect to the network after it is turned on. Try again later.
  • Page 215 Check that the device is connected via an MHL cable to the HDMI/MHL (VIDEO 2 IN) (*) or HDMI IN SAT/CATV (MHL) jacks. Be sure to use an authorized MHL cable that bears the MHL logo. For STR-DN1060 only...

  • Page 216: The Remote Control Does Not Function

    [287] Troubleshooting Remote control The remote control does not function. Point the remote control at the remote control sensor on the receiver. Remove any obstructions between the remote control and the receiver. Replace both of the batteries in the remote control with new ones if they are weak. [288] Troubleshooting If the problem is not solved Reverting to the factory default settings...

  • Page 217: Customer Support Websites

    [290] Troubleshooting If the problem is not solved Customer support websites Refer to the following websites for the latest information on the receiver. For customers in the USA: http://esupport.sony.com/ For customers in Canada: http://esupport.sony.com/CA/ For customers in Latin America: http://esupport.sony.com/LA For customers in Europe: www.sony.eu/support...
  • Page 218 MHL Licensing, LLC. The BLUETOOTH® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Sony Corporation is under license. Other trademarks and trade names are those of their respective owners.
  • Page 219 The source code for the software used in this product is subject to the GPL and LGPL, and is available on the Web. To download, please access the following: URL: http://oss.sony.net/Products/Linux/ Please note that Sony cannot answer or respond to any inquiries regarding the content of this source code. How to connect speaker cables Connect speaker cables as illustrated below.
  • Page 220 If you connect a subwoofer with a crossover frequency function, set the value to maximum. If you connect a subwoofer with an auto standby function, set it to off (deactivated). For details, refer to the operating instructions of the subwoofer. Note Depending on the characteristics of the subwoofer you are using, the setup distance value may be different from the actual position.
  • Page 221 They bring the exciting and powerful sound of movie theaters into your home. HD-D.C.S.: HD Digital Cinema Sound (HD-D.C.S.) is Sony’s new innovative home theater technology using the latest acoustic and digital signal processing technologies. It is based on the precise response measurement data of a mastering studio.
  • Page 222 PLll Movie: Performs Dolby Pro Logic II Movie mode decoding. This setting is ideal for movies encoded in Dolby Surround. In addition, this mode can reproduce sound in 5.1-channel format when watching videos of overdubbed or old movies. PLllx Movie: Performs Dolby Pro Logic IIx Movie mode decoding.
  • Page 223 sound field makes you feel as if you are really at the recording studio or concert. DSEE HX only works on 2-channel sound sources with a sampling frequency of 44.1 kHz or 48 kHz. However, it does not work during AirPlay playback. PLll Music: Performs Dolby Pro Logic II Music mode decoding.
  • Page 224 Menu list (on the display panel) The following options are available in each menu. Auto Calibration settings [<AUTO CAL>] Auto Calibration start [A.CAL START] Auto Calibration type [CAL TYPE] (*1) FULL FLAT, ENGINEER, FRONT REF, OFF Automatic Phase Matching [A.P.M.] (*1) A.P.M.
  • Page 225 Surround speakers size [SUR SIZE] (*2) LARGE, SMALL Front high speakers size [FH SIZE] (*2) LARGE, SMALL Surround Speaker Assign [SUR ASSIGN] (*5) (for STR-DN1060 only) OFF, ZONE3 Surround back speaker assign [SB ASSIGN] (*6) SPK B, ZONE2 (for STR-DN1060 only), BI-AMP, OFF Front left speaker distance [FL DIST.] (*2)
  • Page 226 For details, see “Changing the name for each input (Name).” in Input Settings menu. Digital audio input assignment [A. ASSIGN] OPT 1, OPT 2, COAX, NONE Component video input assignment [V. ASSIGN] (for STR-DN1060 only) COMP, NONE Surround settings [<SURROUND>] HD-D.C.S.
  • Page 227 HDMI In 4K Scaling [4K SCALING] AUTO, OFF Control for HDMI [CTRL: HDMI] CTRL ON, CTRL OFF Standby Through [STBY THRU] ON, AUTO, OFF HDMI Out B Mode [OUTB MODE] (for STR-DN1060 only) MAIN, ZONE Priority [PRIORITY] MAIN&ZONE, MAIN ONLY...
  • Page 228 HDMI Audio Out [AUDIO OUT] AMP, TV+AMP HDMI Subwoofer Level [SW LEVEL] SW AUTO, SW +10 dB, SW 0 dB Fast View [FAST VIEW] AUTO, OFF MHL Auto Input [MHL.AUTO IN] ON, OFF BLUETOOTH settings [<BT>] BLUETOOTH Mode [BT MODE] (*9) RECEIVE, TRANSMIT, OFF BLUETOOTH AAC [BT AAC] (*10) AAC ON, AAC OFF...

  • Page 229: Supported Photo Formats

    and front high speakers. (i.e. 3/2.1, 3/2, 2/2.1, 2/2, 3/0.1, 3/0, 2/0.1, 2/0) You can only select this parameter if the speaker is set to [SMALL]. You can only select this parameter if you select [HD-D.C.S.] as the sound field. You cannot select this parameter when [Bluetooth] or [Screen mirroring] function is selected.
  • Page 230 PNG (*4): .png GIF (*4): .gif Compatibility with all encoding/writing software, recording devices and recording media cannot be guaranteed. The receiver may not play this file format on a Home Network server. The receiver does not play DST encoded files. The receiver does not play animated PNG or animated GIF files.
  • Page 231 Available speakers: FL/FR (Front Left/Front Right) FL/CNT (Front Left/Center) CNT/FR (Center/Front Right) FR/SR (Front Right/Surround Right) SR/SBR (Surround Right/Surround Back Right) SR/SB (Surround Right/Surround Back) SBR/SBL (Surround Back Right/Surround Back Left) SR/SL (Surround Right/Surround Left) SBL/SL (Surround Back Left/Surround Left) SB/SL (Surround Back/Surround Left) SL/FL (Surround Left/Front Left) LH/RH (Left Front High/Right Front High)
  • Page 232 3. Select the speakers to output the sound from. The front 2 channel source sound is output sequentially from adjacent speakers. 4. Adjust the speaker level using MASTER VOLUME on the receiver. Available speakers: FL/FR (Front Left/Front Right) FL/CNT (Front Left/Center) CNT/FR (Center/Front Right) FR/SR (Front Right/Surround Right) SR/SBR (Surround Right/Surround Back Right)

This manual is also suitable for:

Str-dn860

Table of Contents