Miele DA 5960 W Operating And Installation Instructions page 27

3 protective shields
to prevent scratches to the chimney
during installation.
1 vent collar
for use with 6" (150 mm) exhaust
ducting
1 reducing collar
for use with 5" (125 mm) exhaust
ducting.
2 protective strips
for chimney mounting
Upper retaining plate secures the
chimney extension
Middle retaining plate for additional
stability of the chimney
Lower retaining plate secures the
canopy and motor assembly.
Installation kit for recirculation
mode; contains diverter, hose and
hose clips
(optional accessory)
1 lever for dismantling the chimney
Installation instruction diagram
Installation accessories
8 large headed screws 5 x 40 mm
for securing the retaining plates and the
canopy
(S8 wall anchors included in the
packaging are not for use in USA)
2 M 6 locking nuts
for securing the unit
,
CAUTION
To avoid risk of hand or other injury,
avoid contact with sharp edges
during the assembly and installation
process.
27