4 - INSTALLATION
TECHNICAL INFORMATION FOR THE
INSTALLER
In order to install the cooker top into the kitchen
fixture, a hole with the dimensions shown in fig.
4.2 has to be made, bearing in mind the fol-
lowing:
•
within the unit, between the bottom of the
cooktop and the upper surface of a shelf
there must be a clearance of at least 30
mm. It is absolutely essential that you pla-
ce a separator between the base of the
cooktop and the built-in unit or the oven;
•
the cooker top must be kept no less than
200 mm away from any side wall (fig.
4.2);
•
the hob must be installed at least 60 mm
from the wall;
•
there must be a distance of at least 650
mm between the hob and any wall cupbo-
ard or extractor hood positioned immedia-
tely above (see fig. 4.1);
•
if the hob is instal-
led over a built-in
oven, there must
be a distance of
at least 30 mm
between the two
appliances.
two
appliances
shall be connec-
ted to the gas /
electrical supply
with independent
connections.
INSTALLATION IN KITCHEN
CABINET WITH DOOR
It is recommended that a 30 mm clearance
be left between the cooker top and the fix-
ture surface (fig. 4.3).
The
Fig. 4.2
(fig. 4.3)
Fig. 4.1
Clearance
Door
Space for
connections
Fig. 4.3
13