Extending The Cooling Down Time - Miele T 8822 C Operating Instructions Manual

Extending the cooling down
time
The cooling down phase which takes
place before the end of a programme
can be lengthened if required. This
makes the garments easier to handle.
The cooling down time
– can be extended by 5 minutes or 10
minutes.
– can only be extended for
programmes with drying levels.
Follow steps
and store in memory.
The programmable functions are
activated with the buttons.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
to to programme
Programmable functions
Press the Start/Stop button and keep
it pressed in whilst carrying out steps
- .
Press the jk button in.
Wait until the indicator light for the Start/
Stop button lights up constantly . . .
. . . and then release the Start/Stop
button.
Press the Low temperature button
four times.
– The Low temperature indicator light
will briefly flash on and off seven
times.
– P and 0 (default setting) will flash
alternately in the display.
The number which appears alternately
in the display with P means:
0 Default setting
I The cooling down time will be five
minutes longer.
(The Automatic plus indicator light
will also flash once).
2 The cooling down time will be ten
minutes longer.
(The Automatic plus indicator light
will also flash twice).
Pressing the Start/Stop button
switches from one number to
another.
Switch the dryer off with the jk
button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
49