Anti-Crease Setting - Miele T 8822 C Operating Instructions Manual

Programmable functions

Anti-crease setting

Anti-crease helps prevent creasing,
if laundry is not normally removed
immediately after the end of a
programme.
After the programme has finished, the
drum will continue to rotate at intervals
for:
– 2 hours (factory default setting).
– 1 hour.
It is a good idea to leave the
anti-crease function activated to help
prevent creasing for when it is not
possible to remove laundry immediately
after the end of the programme.
Follow steps
and store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
46
to to programme
Press the Start/Stop button and keep
it pressed in whilst carrying out steps
- .
Press the jk button in.
Wait until the indicator light for the Start/
Stop button lights up constantly . . .
. . . and then release the Start/Stop
button.
Press the Low temperature button
once.
– The Low temperature indicator light
will briefly flash on and off three
times.
– P and 2 (default setting) will flash
alternately in the display.
The number which appears alternately
in the display with P means:
0 Anti-crease deactivated
1 1 hour anti-crease
(The Automatic plus indicator light
will also flash once).
2 2 hours anti-crease
(The Automatic plus indicator light
will also flash twice).
(default setting)
Pressing the Start/Stop button
switches from one number to
another.
Switch the dryer off with the jk
button.
The setting you have selected is now
stored in memory. You can change it
again at any time.