Specifications - Sony DWR-R01D Operating Instructions Manual

Specifications

Tuner section
Type of reception
Space diversity
Circuit system
Double superheterodyne
Local oscillators
Crystal-controlled PLL synthesizer
ANTENNA a/b IN connectors
BNC-R, 50 ohms (2)
ANTENNA a/b OUT connectors
BNC-R, 50 ohms (2)
Sensitivity 20 dBµ or less (at bit error rate = 1 × 10
no decline in S/N ratio)
Audio section
ANALOG OUT 1/2 connectors
XLR-3-32 type, 47 Ω or less (2)
DIGITAL OUT 1/2/3 connectors
XLR-3-32 type, 110 Ω (2)
BNC-R, 75 Ω (1)
WORD SYNC IN/OUT connectors
BNC-R (input: 1, output: 1) with a 75 Ω
termination switch
Reference output level (0 dBu = 0.775 Vrms)
Analog: –58 dBu (when MIC output)
Digital: –36 dBFs
Dynamic range 106 dB or more (A-weighted)
T.H.D 0.03% or less
Audio delay 1.9 ms (analog output)
1.9 ms (digital output)
General
Operating voltage
US models: 120 V AC
European model: 230 V AC
Power consumption
22 W
Operating temperature
0 to 50 °C (32 to 122 °F)
Storage temperature
–20 to +60 °C (–4 to +140 °F)
42
Specifications
–12 dBu (when LINE output)
Dimensions (unit: mm (inches))
–5
,
Mass Approx. 4.1 kg (9 lb 1 oz) (including the
Wireless remote control
2.4 GHz IEEE802.15.4 compliant
LAN (10/100) connector
RJ-45 modular jack (1)
100BASE-TX: IEEE802.3u compliant
10BASE-T: IEEE802.3 compliant
Supplied accessories
Whip antenna (2)
Antenna mount with BNC connector (2)
AC power cord (1)
Foot (4)
Operating Instructions (1)
Operating Instructions (CD-ROM) (1)
PC control software (CD-ROM) (1)
Warranty card (US models only) (1)
Design and specifications are subject to change without
notice.
Note
Always verify that the unit is operating properly before
use. SONY WILL NOT BE LIABLE FOR DAMAGES
OF ANY KIND INCLUDING, BUT NOT LIMITED
TO, COMPENSATION OR REIMBURSEMENT ON
ACCOUNT OF THE LOSS OF PRESENT OR
PROSPECTIVE PROFITS DUE TO FAILURE OF
THIS UNIT, EITHER DURING THE WARRANTY
PERIOD OR AFTER EXPIRATION OF THE
WARRANTY, OR FOR ANY OTHER REASON
WHATSOEVER.
attached antenna)