Preparation - Sony DWR-R01D Operating Instructions Manual

Preparation

Rack Mounting
Use the EIA standard 19-inch rack (1U size) with a depth
of 350 mm to install the DWR-R01D.
Screws
(+B M5 × 12)
DWR-R01D
To use the DWR-R01D without installing in
the rack
Attach the supplied four feet to the bottom of this unit, as
illustrated below.
Foot
Pin
Attach the feet into the holes on this
unit, and then fix the feet by pushing
the pins into the holes on the feet.
To install the DWR-R01D in the rack, be sure to remove
the attached feet.
Rack
Screws
(+B M5 × 12)
17
Preparation