Panasonic DBS 824 Manual page 18

April 2 1996
Operation
Notes
to enable the MSC key for Auto-Answer Voice Message
Extension Port where
VB-44225 Large-Display
Phone is installed
To Program Voice Mailbox Access Codes into the MSG Key
Press PROG MSG [16-digit number1 HOLD
The display will reflect "Regist Data"
To Confirm a Voice Mailbox Access Code Programmed into the
Message Key
Press CONF MSG
The programmed access code will be displayed
Operation
With Message Waiting Indicator
the phone's upper right corner will flash whenever a callback message or voice
message has been received
Operation During Call States
idle, receiving dial tone, or in Directory Mode (via select key)
Operation Phone Has Both a Callback Message from another Extension and
Voice Message
a Messages are accessed in a First In, First Out order If the
callback message was received before the voice message, then pressing the MSG
key will activate Auto-Callback first Likewise, if the voice message was received
before the callback message, pressing the MSG key will access your Voice
Mailbox
Interaction with Tone-Calling Mode
that is in tone-calling mode (i e , not voice-calling), that phone must answer or the
message canceled before another message can be accessed
FF-Key Restrictiun
FF3 (ExtPort)# 53# (8 or I)#
The MSG key will work only when the phone is
If an Auto-Callback is placed to a phone
These new MSG features cannot be assigned to an FF-key
DBS Release Notes
CPC S/M Version 2 0
a "Message Waiting"
a "Message Waiting"
The Message Waiting Indicator on
44 Series Phone Support Page 17