Panasonic KX-NCP500 Programming Manual page 36

3.1.8 Voice/FAX
Default
Current slot number
Value Range
Slot number
Port
Indicates the port number (reference only).
Default
Current port number
Value Range
Port number
Connection
Indicates the port status.
This column offers two ways to open the screen to select the port command:
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
IP Codec Priority—1st, 2nd, 3rd
Specifies the priority of the codecs to be used. None is only available for 2nd and 3rd priorities.
Default
1st: G.711A
2nd: G.711µ
3rd: G.729A
Value Range
G.711A, G.711µ, G.729A, None
Packet Sampling Time (G.711A)
Specifies the time interval between measurements (samples) of sound data during a conversation. The smaller
this number, the higher the quality of the transmitted sound.
Default
20 ms
36 Programming Manual for Virtual SIP CO Line Card Document Version 2011-10