Panasonic KX-NCP500 Programming Manual page 26

3.1.3 Register
•
Click the desired cell in the column.
•
Select the desired cell in the column, and then click Command.
Default
Current status
Value Range
INS: The port is in service.
OUS: The port is out of service.
Fault: The port is not communicating with the network.
Register Ability
Specifies whether to send the REGISTER message to the SIP server.
Default
Enable
Value Range
Disable, Enable
Register Sending Interval
Specifies the maximum length of interval time after which the PBX sends the REGISTER message.
Default
3600 s
Value Range
10–86400 s
Un-Register Ability when port INS
Specifies whether to unregister the previous registration and send the REGISTER message to the SIP server
when the port status is set back to INS.
Default
Enable
Value Range
Disable, Enable
Registrar Server—Name
Specifies the domain name of the SIP registrar server.
Default
Not stored.
Value Range
Max. 100 characters
26 Programming Manual for Virtual SIP CO Line Card Document Version 2011-10