Video Menu - Sony PMW-F55 Operating Instructions Manual

Video Menu

Video
Menu items Sub items and setting values Contents
Output On/Off SDI (Sub)
On / Off
Setting the video
output
HDMI
On / Off
Output Format SDI (Main)
Setting for the
output format
SDI (Sub)
HDMI
EXT IF
Test
Output Setting
4K/2K to HD Conv.
Letter Box / Edge Crop /
Setting for the
Anamo ×1.3 / Anamo ×2
output conversion
mode
Monitor LUT MLUT Select
P1: 709 (800%)
Setting for the
P2: HG8009G40
monitor LUT
P3: HG8009G33
Main, Sub & Internal Rec
MLUT On / MLUT Off
HDMI & VF
MLUT On / MLUT Off
Turns the SDI (Sub) output on/off.
Turns the HDMI output on/off.
Selects the SDI (Main) output format.
The setting value differs, depending on the settings of
"Frequency" in "System Setting" and "Rec Format" of the
System menu (page 71).
Selects the SDI (sub) output format.
The setting value differs, depending on the settings of
"Frequency" in "System Setting" of the System menu and
"SDI (Main)" in "Output Format" of the Video menu (page
71).
Selects the HDMI output format.
The setting value differs, depending on the settings of
"Frequency" in "System Setting" and "Rec Format" of the
System menu (page 72).
Displays the extend IF output signal.
Displays the video output signal.
Sets the output conversion mode for 17:9 t 16:9 signal.
(This setting is available only when "Format" in "Rec
Format" of the System menu is set to "XAVC 4096 × 2160P.")
Anamo ×1.3 / Anamo ×2: Corrects the distortion of the
images that are output from the video output when using an
anamorphic lens. (This setting is available only when "Main
Operation" in "Base Setting" of the System menu is set to
"RAW.")
Note
The HD output signal when "Main Operation" in "Base
Setting" of the System menu is set to "RAW," or the internal
recorded signal when "Setting" in "Rec Control" of the
Recording menu is set to "SxS & AXS," is "Letter Box"-
equivalent signal.
Sets MLUT that is used for the picture of SDI (Main) output,
viewfinder output, internal record, SDI (sub) output, HDMI
output, and video output when "Shooting Mode" in "Base
Setting" (page 62) of the System menu is set to "Cine EI."
Turns on/off Monitor LUT of the SDI (Main, Sub) & Internal
Rec output.
(This setting is available only when "Shooting Mode" in
"Base Setting" of the System menu is set to "Cine EI.")
Turns on/off Monitor LUT of the HDMI &VF output.
(This setting is available only when "Shooting Mode" in
"Base Setting" of the System menu is set to "Cine EI.")
Setup Menu List 55