Table of Contents
Advertisement
For details on Wi-Fi settings, see page 48.
General notes on Wi-Fi connectivity
Tap a network SSID in the [Wi-Fi Networks] list to
display the access point's status and related
information.
Before setting the Wi-Fi network connection, refer
to the instructions of the Wi-Fi router, and check the
SSID and security method.
You can configure up to 20 Wi-Fi network
connections.
The device does not support certain custom Wi-Fi
network security systems. For details, refer to your
Wi-Fi router's instruction manual.
If you change the password of the connected Wi-Fi
router, enter the new password and reconnect it.
To use a static IP address, press the
button in [Wi-Fi Settings] tap [Advanced] tap
[Use Static IP]. Select the option and enter the
address. When the setting is completed, press the
(Back) button to return to [Wi-Fi Settings].
Do not change this setting unless instructed to by a
network administrator, as the Wi-Fi network
connection may not be established correctly.
If the SSID is hidden on the Wi-Fi router, it will not be
displayed in the [Wi-Fi Networks] list of the device.
In this case, manually set up the Wi-Fi network.
The access point may filter access by MAC address.
Check the MAC address by pressing the
button tap [Settings] [About] [Device
Information], then register the MAC address with
the access point to establish a Wi-Fi connection.
To check the network speed and security method
for the connected Wi-Fi network, press the
(Menu) button in [Wi-Fi Settings] tap [Connection
Information].
An access point, once configured, can be connected
to again simply by tapping it in the [Wi-Fi Networks]
list and tapping [Connect].
Using the Network Drive
By using the WebDAV protocol, you can access a
specific network drive to synchronize documents
between the Digital Paper device and the network
drive, or transfer documents from the device to the
network drive. Connect to a Wi-Fi network
beforehand (page 43).
Setting the Network Drive
You can set the log in information, On/Off of Auto
Sync, and download destination. Check with the
network administrator for setup information.
1
Press the
(Menu)
[Server Settings].
2
Tap [Network Drive Settings].
3
Tap [Server Settings] tap the input area and
enter each item using the on-screen keyboard.
(Home)
Item
[Server]
[Port]
[Login name]
(Home) button tap [Settings]
Description
Enters the URL of the network drive.*
2
Enters the port number.*
Enters the username to log in the
network drive.
1
48
Advertisement
Table of Contents
