Set The Reading Mode And Reading Conditions - GE TYPHOON FLA 7000 Getting Started Manual

5.1

Set the reading mode and reading conditions

Start the system
1 Turn on Typhoon FLA 7000 and the computer.
2 Start the Typhoon FLA 7000 control software.
Set the reading conditions
Click the Fluorescence button in the main window to reach the Reader Settings window
for the fluorescence mode .
Set the reading conditions by following the steps in the table below.
Note:
Getting Started with Typhoon FLA 7000 28-9607-64 AD
All parts in the window are described in
page 15.
1
2
3
4
5
6
Part Description
1 Image folder: specify where to save the file after the reading.
2 File Name: enter the name of a file to save image data.
5 Reading fluorescent samples
5.1 Set the reading mode and reading conditions
Overview of the main window, on
10
11
7
8
9
77