NEC Express5800/320Fd-MR N8800-123F, EXP320K User Manual page 244

5-46 Installing and Using Utilities
Monitoring Hard Disk Drive (HDD)
To monitor the hard disks and detect disk failures at an early stage, use the NEC ESMPRO Manager
and Agent. You can see configurations and information of hard disk in the DataViewer.
Monitoring HDD Operations
This section describes how to maintain hard disk drives.
1.
Verification of HDD failure
If NEC ESMPRO Agent detects some problem with a HDD, it will report an alert of the
problem to NEC ESMPRO Manager. Please check the AlertViewer in the manager
regularly.
Ex. If a HDD in SCSI Slot (10/40/1) is broken, agent reports the following alert.
Device 10/40/1 is now BROKEN.
And manager displays the problem information of the hard disk in the [SCSI enclosure]
→ [SCSI Slot] → [General] of the DataViewer.
[SCSI Slot] → [General]