LG BNU-BAC Installation & Owner's Manual page 23

3. After selection "Setting" mode using the up/down(▲, ▼) button, use the left/right(◀, ▶) button to
select the desired function.
Enter the IP address
[MENU]
Set IP address
Enter the Set BACnet Type
[MENU]
Set BACnet Type
4. Press the "MENU/SELECT" button at the desired function to enter into the setup window for the
said mode.
Note: LG BACnet Gateway support two type Gateway depend on selection type "A" and type " B".
Type "A" support multi device per one IP address and Type " B" support only one device per
one IP address.
After asking BMS engineer about multi device or one device per one IP address, select LG
BACnet Gateway's "Set BACnet Type".
MENU/
SELECT
Enter the Gateway address
[MENU]
Set GW address
How to install
Enter the Net mask
[MENU]
Set Netmask
Installation/Owner Manual 23