Table of Contents
Advertisement
2.5
Registration (Pairing)
The Indoor and Outdoor Pet Units are pre-registered to your Owner Unit.
You do not need to register it again unless the Indoor Pet Unit loses its
link with the Owner Unit.
To re-register your Indoor Pet Unit, or register a new Indoor Pet Unit,
follow the procedure below:
M
1. Press the
<
2. Press the
and the
/
+
3. Press the
the OK button to confirm.
4.
1 /
2 /
button to select the desired CAM and press the OK button to start
searching for a pet unit. The green audio level LED will flash rapidly
while searching.
5. Press the OK button to confirm.
6. Press and hold the PAIR button underneath the Indoor Pet Unit until
the Owner unit finds the camera, beeps and the video from the
camera appears.
NOTE
If a particular Indoor Pet Unit was registered previously, registering this
current Indoor Pet Unit again will overwrite the previous registration.
2.6
View Video Through TV
Connect a suitable AV cable into the AV OUT socket on the side of the
Owner Unit and into the AV input of the TV. Scroll through the AV inputs
on the TV menu until the Indoor Pet Unit picture is visible.
An AV cable is an optional accessory available for purchase separately.
NOTE
The Indoor Pet Unit's power button must be turned ON and CAM pre-
selected before connecting the AV cable. Once the AV cable is
connected, the Indoor Pet Unit's controls cannot be activated.
Getting Started
button of the Owner unit and the menu bar will pop up.
>
LEFT button or
/
/
menu will pop up.
-
UP button or
3 /
4 will pop up, press the
RIGHT button until
DOWN button to select
+
UP button or
is highlighted,
, and press
-
DOWN
17
Advertisement
Table of Contents
