Table of Contents
Advertisement
10
Micro USB port
11
NFC detection/tapping area
The ventilation hole is not used for resetting the device. Do not insert or force sharp objects in
the hole as this may damage the device.
Charging your SmartBand 2
Before using your SmartBand 2 for the first time, you need to charge it for
approximately 30 minutes. Sony chargers are recommended.
Your SmartBand 2 turns off automatically when the charger is connected. You cannot
turn on the device while a charger is connected.
To charge your SmartBand 2
1
Plug one end of the USB cable into the charger or into the USB port of a
computer.
2
Plug the other end of the cable into the Micro USB port of your SmartBand 2.
3
While the battery is charging, notification light A changes from red to orange.
The notification light changes to green when you reach 90% battery power.
Make sure the USB port is dry before you insert a USB cable into the port.
Your SmartBand 2 turns off when connecting to a charger, and goes back to its previous
on/off state when the charger is unplugged.
Battery notification light status
Red light
Battery is charging and the charge level is less than 15%.
Orange light
Battery is charging and the charge level is between 15% and 90%.
Green light
Battery is charging and the charge level is greater than 90%.
To check the battery level of your SmartBand 2
•
From the main application screen of your Android™ device, find and tap the
SmartBand 2 application, the battery percentage level appears on the screen.
Low battery level notification
When your SmartBand 2 reaches a specific battery level, the device vibrates and the
red light starts flashing every 4 seconds until you charge the device or it powers off.
The low battery level notification is triggered when you have approximately 5 minutes
left in Heart Activity mode and 75 minutes in STAMINA mode. The time varies
depending on usage. When battery level is below 1%, your SmartBand 2
automatically turns off. You need to charge your SmartBand 2 when the battery runs
out of power.
If the "Do not disturb" function is turned on, you will not get the low battery notification.
This is an Internet version of this publication. © Print only for private use.
4
Hide quick links:
Advertisement
Table of Contents
