Grandstream Networks GXP2130 Administration Manual page 43

Use # as Dial Key
On Hold Reminder Tone
Account x  Feature Codes
Enable Local Call
Features
Do Not Disturb
(DND)--On
Do Not Disturb
(DND)--Off
Call Forward
Unconditionally (All)--On
Call Forward
Unconditionally (All)--Off
Call Forward Busy--On
Call Forward Busy--Off
Call Forward Delayed
(No Answer)--On
Call Forward Delayed
(No Answer)--Off
Delayed Call Forward
Wait Time
GXP2130/GXP2140/GXP2160
FIRMWARE VERSION 1.0.5.18
Allows users to configure the "#" key as the "Send" key. If set to "Yes", the "#"
key will immediately dial out the input digits. In this case, this key is essentially
equivalent to the "Send" key. If set to "No", the "#" key is included as part of the
dialing string and please make sure the dial plan is properly configured to allow
dialing # out. The default setting is "Yes".
If set to "Enabled", phone will play a reminder tone when it has a call on hold.
The default setting is "Disabled".
When enabled, Do No Disturb, Call Forwarding and other call features can be
used via the local feature codes on the phone. Otherwise, the provisioned
feature codes from the server will be used. User configured feature codes will
be used only if server provisioned feature codes are not provided. And once
feature codes are configured, either via server provisioning or local setting, a
softkey named "Features" will show on the LCD screen.
Configures DND feature code to turn on DND.
Configures DND feature code to turn off DND.
Configures Call Forward All feature code to activate unconditional call
forwarding.
Configures Call Forward All feature code to deactivate unconditional call
forwarding
Configures Call Forward Busy feature code to activate busy call forwarding.
Configures Call Forward Busy feature code to deactivate busy call forwarding.
Configures Call Forward Delayed feature code to activate no answer call
forwarding.
Configures Call Forward Delayed feature code to activate no answer call
forwarding.
Defines the timeout (in seconds) before the call is forwarded on no answer.
The default value is 20 seconds. The valid range is 1 to 120.
GXP2130/GXP2140/GXP2160
ADMINISTRATION GUIDE
Page 41 of 87