Lexmark S300 Series Installation Manual
  1. Manuals
  2. Brands
  3. Lexmark Manuals
  4. Printer
  5. S300
  6. Installation manual
Lexmark S300 Series Installation Manual

Lexmark S300 Series Installation Manual

Hide thumbs Also See for S300 Series:

Advertisement

Table of Contents

1

Unpack printer

2
Remove tape and packing material from all areas of the
printer
Lexmark S300 Series Installation
Notes:
Place the printer near the computer
•
during setup. If you're setting up on
a wireless network, then you may
move the printer after setup is
complete.
Do not attach the USB cable until
•
prompted to do so.
The packaged printhead is shipped
•
inside the printer.
Contents may vary by model and
•
region.

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the S300 Series and is the answer not in the manual?

Questions and answers

Related Manuals for Lexmark S300 Series

Summary of Contents for Lexmark S300 Series

  • Page 1: Unpack Printer

    Lexmark S300 Series Installation Unpack printer Notes: Place the printer near the computer • during setup. If you're setting up on a wireless network, then you may move the printer after setup is complete. Do not attach the USB cable until •...
  • Page 2 Lexmark S300 Series Installation Raise paper support Raise printer control panel...
  • Page 3 Lexmark S300 Series Installation Open printer and remove packaged printhead from printer If necessary, insert correct (1) language overlay and install (2) protective cover...
  • Page 4 Lexmark S300 Series Installation Lock the protective cover in place Close printer...

  • Page 5: Load Paper

    Lexmark S300 Series Installation Use lever to extend paper guides Load paper Note: Use the lever to adjust the paper guides.
  • Page 6 Lexmark S300 Series Installation Extend paper exit tray Connect power cord only Note: DO NOT attach the USB cable yet. CAUTION—POTENTIAL INJURY: Read the safety information included with this product before connecting power or making any cabling connections. Make sure printer is on...

  • Page 7: Set Language

    Lexmark S300 Series Installation Set language Using the printer control panel, press until the language you want appears on the display. Press OK to save. Set country/region Using the printer control panel, press until the country or region you want appears on the display.
  • Page 8 Lexmark S300 Series Installation Squeeze and lift latch Remove printhead from disposable container Insert printhead and close latch until it clicks...

  • Page 9: Close Printer

    Lexmark S300 Series Installation Close printer Open printer Note: The printhead moves to the cartridge installation position as shown.
  • Page 10 Lexmark S300 Series Installation First, insert each color ink cartridge. Then, use two hands to install black cartridge. Close printer Press OK to print alignment page Notes: Do not remove the page until • printing stops. The alignment page may take a while to print and will move in and out during the process.

Table of Contents