Using The Optional Accessories (Bluetooth Devices/Voice Unit); Using The Bluetooth Headset; Mounting The Bluetooth Unit "Bu-2 - Yaesu FTM-100DR Operating Manual

Using the Optional Accessories

Using the Bluetooth headset

You can operate receive and transmit using the optional wireless Bluetooth unit "BU-2"
and Bluetooth headset "BH-2A".
Activating the VOX (Voice Operated Xmit) function enables hands-free communications
Tip
Bluetooth headsets other than the optional Yaesu headset may also be used, however not all the
functions are guaranteed to work properly.

Mounting the Bluetooth unit "BU-2"

● What to prepare
• Bluetooth unit "BU-2" (optional)
• Phillips-head screwdriver
● Mounting procedure
Cautions
z Avoid touching the IC components with your hands as the semiconductors may be damaged by
static electricity.
z Note that installation of optional items may incur additional labor charges.
1
Turn off the transceiver.
2
Turn off the external device.
3
Disconnect the control cable, microphone cable and DC power cable.
4
Remove the 8 screws in total from the
transceiver (4 screws from the top panel and 2
screws from the right and left sides).
(Bluetooth Devices/Voice Unit)
151