Elements And Construction Of Slide Kamera Sp Series Slider - Slide Kamera SP BASIC series User Manual

1. Elements and construcion of Slide Kamera SP series slider
Once you receive the shipment please make sure that all the elements of Slide Kamera SP series slider are inside.
It is forbidden to remove and reinstall the cart. All attempts to do so may cause damage
Set includes:
rail (length of rail depends on the model)
R
- SP-600: 600mm
- SP-1000: 1000mm
f-BASIC SO or f-PRO SP side feet with level adjustment
R
(side feet type depends on slider model)
central mounting port with 3/8'' and 1/4'' holes
R
two mounting ports on both ends of the rail with 3/8'' holes
R
cart with 3/8'' threaded hole and a level
R
AF-11 SL reduction 1/4"-3/8" mandrel
R
AF-12 SL reduction 3/8" mandrel
R
standstill brake
R
user manual
R
Model
SP-600 BASIC
SP-600 PRO
SP-1000 BASIC
S-1000 PRO
Slide Kamera SP series slider construction:
Rail [1]
Cart with 3/8" threaded hole and a level [2]
Central mounting port with 3/8'' and 1/4'' holes [3]
Two mounting ports on both ends of the rail with 3/8'' holes
f-PRO SP side feet [5]
f-BASIC SP side feet with level adjustment [6]
Rubber bumpers [7]
Level [8]
Four M4 holes [9]
AF-12SL reduction 3/8" thread [10]
AF-11SL reduction 1/4"-3/8" thread [11]
Standstill brake [12]
3
to the rollers, the manufacturer is not responsible for.
Central mounting
Length of
port with 3/8''
rail
and 1/4'' holes
600 mm 1
600 mm 1
1000 mm 1
1000 mm 1
Mounting ports
with 3/8'' hole
2
2
2
2
[4]
Slide Kamera SP series slider
Side Feet
Brake
Type
BASIC included
PRO included
BASIC included
PRO included