Fanimation. 7. Fanimation reserves the right to modify or discontinue any product at any time and may substitute any part under this warranty. 8. Under no circumstances may a fan be returned without prior authorization from Fanimation. The receipt of purchase must ac- company authorized returns and must be sent freight prepaid to Fanimation.
• Canopy Screw Cover Fanimation. Substitution of parts or accessories not • Motor Coupling Cover designated for use with this product by Fanimation could • Downlight Socket Plate Assembly result in personal injury or property damage. Contact • Candelabra Bulbs (2) your retail store for missing or damaged parts.
Electrical and Structural Requirements Your new ceiling fan will require a grounded electrical supply line of 120 volts AC, 60 Hz, 15 amp circuit. The outlet box must be securely anchored and capable of withstanding a load of at least 50 lbs. Figure 1 depicts Ceiling different structural configurations that may be used for mounting the outlet box.
Page 5
How to Assemble Your Ceiling Fan (cont’d) 3. Loosen the two setscrews in the Downrod Support. Align the Clevis Pin holes in the Downrod with the holes in the Downrod Support. Install the Clevis Pin and secure Motor with the Hairpin Clip. (Figure 2) Be sure to push the Coupling Cover straight leg of the hairpin clip through the hole near the...
How to Hang Your Ceiling Fan ▲WARNING To avoid possible electrical shock, be sure electricity is less than turned off at the main fuse box before hanging. 18 inches NOTE: If you are not sure if the outlet box is grounded, contact a licensed electrician for advice, as it must be grounded for safe operation.
How to Wire Your Ceiling Fan If you feel that you do not have enough electrical wiring NOTE: If fan or supply wires are different colors than indicated, knowledge or experience, have your fan installed by a have this unit installed by a qualifi ed electrician. licensed electrician.
Installing the Canopy Housing NOTE: This step is applicable after the necessary wiring is completed. ▲WARNING To avoid possible fire or shock, make sure that the spliced electrical wires are turned upward and completely pushed carefully up into the junction box and not pinched between the housing and the ceiling.
4. Securely attach Lower Glass by twisting clockwise onto the Downlight Socket Plate Assembly. Don’t overtighten or force it. (Figure 4). 5. You have now completed the assembly of your ceiling fan. Restore electrical power. Figure 4 Maintenance Periodic cleaning of your new ceiling fan is the only CAUTION maintenance that is needed.
Parts List Model #FP7900** Downrod/Hanger Ball Assembly Containing: Hanger Ball Assembly ADR1-6** Downrod Clevis Pin Hairpin Clip n i l PG165 n i l Downlight Socket Plate Assembly AP790010** e Asm. Set Hardware Bag Containing: “L” shaped Phillips Screwdriver Wire Nuts (4) BALKT HDWFP7900SS Blade Mounting Hardware Bag Containing:...
Need help?
Do you have a question about the The Torto FP7900 and is the answer not in the manual?
Questions and answers