Skytec PA 200 User Manual page 6

Use this troubleshooting guide if: The sound is distorted at high volumes.
■
Input is clipping: Try lowering the input gain or the volume control on your sound source or music
instrument.
■
Output is clipping: Lower the main volume level.
■
There is too much bass: Try adjusting the tone or EQ control on your sound source to lower the
bass level. this will allow you to play the music louder before clipping (distortion) occurs.
■
The link cable: is being plugged into the instrument or MIC input instead of the RCA line input.
Important: With all large speakers, initial "break-in" period is needed to perform at optimal levels. To
properly "break-in" your, play an audio source at medium volume for a few hours.
Input Voltage: AC 100-120V/ 60Hz 220-240V/ 50Hz
POWER CONSUMPTION: 20 WATTS
Frequency Response: 70Hz~ 50kHz +/- 3Db
Produce dimensions: 350x428.5x245.5mm(wxhxd)
Bottom pole mount specifications: Standard Pole Mount found at professional audio retailer:
Depth 80mm (3.15")
Diameter 35.5mm (1.40")
Time required to fully charge the: under 4 hours
Battery life: Over 12 hours* at full volume of full volume of the when fully charged.
"Note: Battery life may vary based on temperature, age, and volume usage of product.
6