Let's Start; Change Source Operation - Avtex W152D User Manual

After this unit is well fixed on the desk or on the wall, and the cords are well connected
for input and output, what you should do next is:
Firstly, connect the adapter to the LCD TV, and turn on the power switch then the unit will go
into standby mode, you can see the indicator turn red.
Secondly, press [STANDBY] key on the left side of the LCD TV or [STANDBY] button on the
remote control to make the unit switch into working mode, and you will see the indicator turns
green. Now you can enjoy all exciting features of the whole new product.
INDICATOR

CHANGE SOURCE OPERATION

You can change the input source by using the source Menu. Press [SOURCE] button or
[SOURCE] key to show the menu as follows:
The current source item is highlighted. Press [
/CH- ] key on the left side of LCD TV to select different source, Press [
/VOL-] key or [OK] button to confirm your choice .

LET'S START

STANDBY
Power switch
TV
DVB
DVD
FM
AV
SCART
YPBPR
VGA
] button on the remote control or [ CH+
8
STANDBY
] button, [VOL+