CoolBox Controls ..............6-7 properly ventilated. Using the Timer Feature ............8 D. If your CoolBox did not come with the truckles (the wheel assembly legs) attached, please Routine Maintenance .............8 see the below instructions on how to do so. Basic Troubleshooting ............9 Circuit board &...
ACCESSING THE DUST SCREEN AND SIDE PANEL THE LCD BUTTON PANEL If you need to access the Dust Screen and Side Panel on your CoolBox, follow the instructions The Cool-A-Zone CoolBox has a user-friendly and easy-to-use LCD indication panel with below.
BUTTON ON/OFF TURNING THE COOLBOX ON THE FIRST TIME The CoolBox Speed will be at Level 2 and the Cool Function will be listed as “On” the first time you power up your Cool-A-Zone CoolBox. PRESSING “ON” DURING STANDBY Turning the unit on during a state of stand-by will power up the CoolBox in the same mode and airflow setting in which it entered the stand-by mode.
2. You will notice that the TIMER button 2. Set the number of hours to “0”; CoolBox, and if the water gets too low, a buzzer will sound and the COOL mode will stop. begins to flicker and you will see that “H x”...
The cool key on the controller is broken Replace the controller Cool-A-Zone cannot be held liable for any modifications made to the above circuit diagram by any party, whether purchasor or third party. The above diagram is provided as a reference point...
Need help?
Do you have a question about the CoolBox and is the answer not in the manual?
Questions and answers