Specifications - MartinLogan MLT-2 User Manual

SPECIFICATIONS

MLT-2 SPEAkER
System Frequency Response
110–20,000 Hz ± 2db
Sensitivity
88 dB@2.83 volts/meter
Impedance
8 Ohms compatible
Crossover Frequency
2000Hz
Tweeter Type
1" (2.54 cm) soft dome
Woofer Type
4.5" (11.5 cm) high rigidity poly cone
with extended throw drive assembly
MLT-2 CENTER CHANNEL
System Frequency Response
130–20,000 Hz ± 2db
Sensitivity
89 dB@2.83 volts/meter
Impedance
8 Ohms Compatible
Crossover Frequency
2300Hz
Tweeter Type
1" (2.54 cm) soft dome
Woofer Type
2 x 3.5" (8.9cm) high rigidity
poly cone with extended throw drive assembly
MLT-2 SUBWOOFER
System Frequency Response
37–200 Hz ± 3 dB. Anechoic in the LFE mode.
Low Pass Filter Frequencies
50Hz–200Hz
Phase
0°, 180°
Woofer Type
10" (25.4 cm) high-excursion, paper cone with
extended throw driver assembly
Enclosure Type
Bass reflex
Amplifier
120 watts RMS (360 watts peak)
*For detailed dimensional drawings, please see page 15.
Specifications are subject to change without notice.
Enclosure Type
Non-resonance asymmetrical
chamber format, sealed
Suitable Amplifier Range
15–100 watts
Power Handling
50 watts
Weight
3.4 lbs. (1.6 kg)
Size*
7-3/4" h x 4-5/8" w x 5-3/4" d
(19.7 h x 11.8 w x 14.6 d cm)
Enclosure Type
Non-resonance asymmetrical
chamber format, sealed
Suitable Amplifier Range
15–100 watts
Power Handling
50 watts
Weight
5 lbs. (2.2 kg)
Size*
4-1/4" h x 12" w x 5-1/2" d
(10.8 h x 30.5 w x 14 d cm)
Impedance
Left & Right/LFE RCA – 10,000 Ohms
Inputs
Left & Right/LFE RCA Line Level
Mains Power Draw
Standby: 12W
Idle: 12W
Max: 250W
Weight
32.6 lbs. each (14.8 kg)
Size*
16" h x 11-1/2" w x 15-1/2" d
(40.7 h x 29.2 w x 39.4 d cm)
16