Rotating The Monitor - BenQ BL2711U User Manual

Rotating the monitor

1. Pivot the display.
Before rotating the monitor with a portrait viewing orientation, the display has to be rotated 90
degrees.
Click to launch the
to set the display to rotate with the monitor automatically.
Pivot
Alternatively, right-click the desktop and select
in
Portrait Orientation
Depending on the operating system on your PC, different procedures should be followed to adjust the screen
orientation. Refer to the help document of your operating system for details.
2. Pivot the OSD menu.
Once the display is rotated, you also need to rotate the OSD menu.
Go to and
Display
3. Fully extend the monitor and tilt it.
Gently lift the display up and extend it to the maximum
extended position. Then tilt the monitor.
The monitor should be vertically extended to allow to rotate
from landscape to portrait mode.
4. Rotate the monitor 90 degrees clockwise as
illustrated.
Display Pilot Software
, and apply the setting.
. Select
Auto Pivot ON
(installed from www.benq.com), and check
Screen resolution
. The OSD menu rotates with the monitor.
from the popup menu. Select
How to assemble your monitor hardware
Auto
90
19