Page 2
Power Turn on the ue 9000 wireless Headphones. Turn on your ue 9000 wireless Headphones. The Bluetooth® Led should blink blue rapidly, indicating that the headphones are discoverable.
Page 3
Bluetooth Led will turn solid blue. Turn on Bluetooth. if pairing times out (the Led will blink slowly), move the slider to the “Bluetooth” select “ue 9000” from “devices.” position and hold it there until the Led starts rapidly blinking again.
Page 4
To Know your ue 9000 wireLess THe Box: HeadPHones. ue 9000 wireless Headphones Molded travel case On/Off/Bluetooth connection slider optional audio cable with on-cord mic and controls Bluetooth LED usB charging cable Battery level LED ac adapter ¼-inch (6.35 mm) adapter...
Page 6
FeaTures: Led BeHavior. Battery Level Led Bluetooth Led Headphone off Headphones off or connected to an audio source via the 3.5 mm jack Green (pulsing slowly): charging Blue (blinking rapidly): Discoverable/pairing mode Green (solid): Power on; fully charged Blue (blinking slowly): connecting Red: Low battery Blue (solid): connected when in wireless mode, all Leds turn off automatically.
Page 7
FeaTures: cHarging. Computer USB port Micro USB charging port USB charging cable AC power adapter Typically a three-hour charge through an ac outlet provides up to 10 hours of power, and you can use your headphones while they’re charging. when the battery level Led turns red, you should recharge your headphones. To do so: 1.
Page 8
FeaTures: TraveL sTorage. To safely store your headphones while you’re on the go: 1. Swivel the ear cups until they “click”. 2. Place the headphones flat in their case. 3. Place the AC adapter in the top pocket. 4. Place all cables and accessories in the bottom pocket.
Page 9
• Download the latest software for your product. • Find online documentation and warranty information. • Connect with other users in our Community Forums to get advice, ask questions and share solutions. • Order spare parts (when available). go to www.logitech.com/support/ue9000...
Page 10
• Enable Bluetooth on your device, and then select “UE 9000” from the Bluetooth device list. • To fix a Bluetooth connection by repairing: 1.
Page 12
BaTTery reMovaL and recycLing 1. Peel and remove the ear pad from the left ear cup. 2. remove screws to disassemble the speaker chamber. 3. unplug the old battery. 4. dispose of old battery at an authorized battery recycling center.
Page 13
HeadPHone disasseMBLy Remove screws Unplug battery Peel and remove earpad LEFT EAR CUP...
Need help?
Do you have a question about the UE 9000 and is the answer not in the manual?
Questions and answers